| No. | Brand | J | F | f | T | A | s | S | r |
| 20.5% | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| BMP50/OMP50 | - | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6202-2RS | - | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| TCR2 | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| SQP41-50-2/3/4/5/6/7/8/9/10/11/12/14 | TOKYO | - | - | - | - | - | - | - | - |
| (6D31) | - | - | 26.5 mm | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| PC800-8 | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| (F01,F02,F04,F06,F07,F10,F13) | - | - | - | - | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| Angular Contact Ball Bearing 15TAC47B 15X47X15MM | D:140mm; SKU:22216-e1-k-fag; Clearance:Standard; Dynamic Load Rating (kN):249; Reference Speed Rating (r/min):3550; Weight:0.02 KGS; Fatigue Load Rating (kN):33.5; Seals or Shields:Open Type; d:80mm; Availability:In Stock; |
| 87298 / CR87298 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Plastic; Availability:In Stock; Clearance:C3; Grease Limiting Speed (r/min):12000; Weight:0.02 KGS; Oil Limiting Speed (r/min):14000; d:25mm; Static Load Rating (kN):3.3; B:15mm; Seals or Shields:Open Type; |
| AHX3228G Withdrawal Sleeve(matched Bearing:23228CCK/W33) | d:35 mm; l5 ≈:25 mm; G:M 36x3; dk:47 mm; l4 max.:174 mm; Mass rod end:1.4 kg; α:6 °; h1:130 mm; Basic static load rating C0:134 kN; Material constant KM:330; |
| CP1022 Thrust Plate 10x21.5x0.8mm | B:305 mm; Design variant/feature:NNUB.2/C3WO; Da max.:500 mm; Limiting speed:1300 r/min; da min.:360 mm; rb max.:4 mm; D:520 mm; Basic dynamic load rating C:3300 kN; Reference speed:900 r/min; Calculation factor kr:0.38; |
| CR99251 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:286000 N; d:80.000 mm; B:96.00 mm; D:200.0000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:365000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2700 rpm; |
| FTRC1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x2mm | Clearance:C3; Cage Type:Plastic; Availability:In Stock; d:30mm; B:27mm; SKU:2306tnc3-qbl; D:72mm; Weight:0.02 KGS; Seals or Shields:Open Type; |
| FTRA100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1mm | Limiting speed:30000 r/min; ra max.:1 mm; Reference speed:17000 r/min; F:26.5 mm; D:47 mm; B:14 mm; d:20 mm; Basic static load rating C0:22 kN; db min.:31 mm; Basic dynamic load rating C:28.5 kN; |
| TRE4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x4mm | r1,2 min.:7 mm; Cb min.:12.5 mm; Da min.:184 mm; Calculation factor e:0.33; C:53.975 mm; d:114.975 mm; Fatigue load limit Pu:88 kN; T:66.675 mm; Dimension series:HH 224300; Reference speed:2200 r/min; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
99750 / CR99750 Stainless Speedi Sleeve For Shaft Repair Video