| No. | Brand | J | F | f | T | A | s | S | r |
| NU2219-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| NU2222 | NSK | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| 6212LLB/2A, | NTN | - | - | - | - | - | - | - | - |
| NA4908 | - | - | - | - | - | - | - | - | - |
| 505300A5110ZAAAAP, | Danfoss | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 10W/12W | - | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 3-Tier | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| UC209D1 | NSK | - | - | - | - | - | - | - | - |
| 90785 / CR90785 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; Weight:0.02 KGS; Seals or Shields:Open Type; Cage Type:Steel; D:47mm; Availability:In Stock; B:12mm; d:25mm; SKU:6005/c3-qbl; |
| 85844 / CR85844 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:110mm; SKU:6212c3-nsk; Dynamic Load Rating (kN):52.5; B:22mm; Clearance:C3; Fatigue Load Rating (kN):--; Cage Type:Steel; Static Load Rating (kN):36; Availability:In Stock; |
| CP34060 Thrust Plate 40x59.5x3mm | h:40.922 mm; Max. speed for Taconite seal:700 r/min; A1:120.65 mm; da:114.3 mm; P180°:72.5 kN; Housing:SSAFS 026 KA; Cap bolt:5/8-11 UNC; Taconite seal:TER 118; PG:1/4 NPT; H1:125.425 mm; |
| AOH3156G(23156CCK/W33, 23156CCK, 23156CAK, 23156CAK/W33,C3156K Bearing Withdrawal Sleeve) | Fillet Radius ra:0.30 mm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:4940 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Static Radial Load Rating Co:4150 N; Accessories:One Seal; B:7.00 mm; d:40.000 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Sealed Speed Rating n3:7500 rpm; |
| CPR64078 Thrust Plate 40x78x6mm | SKU:2313-qbl; Cage Type:Steel; D:140mm; Weight:0.02 KGS; B:48mm; d:65mm; Seals or Shields:Open Type; Clearance:Standard; Availability:In Stock; |
| 85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Limiting Speed Rating (r/min):4000; SKU:22317-e1a-k-m-c3-fag; Fatigue Load Rating (kN):50; B:60mm; Seals or Shields:Open Type; D:180mm; Dynamic Load Rating (kN):540; Cage Type:Brass; Static Load Rating (kN):560; |
| LAGG 400B/US Battery Driven Grease Gun | Clearance:Standard; Weight:15.20 KGS; D:280mm; SKU:6326-nsk; d:130mm; B:58mm; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Steel; Oil Limiting Speed (r/min):2600; |
| VHIS 35 Bearing Induction Heater | Availability:In Stock; Weight:1.20 KGS; Oil Limiting Speed (r/min):8000; Seals or Shields:Open Type; Fatigue Load Rating (kN):12.9; B:24mm; SKU:n1018ktn9/sp-skf; Clearance:Standard; Dynamic Load Rating (kN):79.2; Grease Limiting Speed (r/min):7000; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
99725 / CR99725 Stainless Speedi Sleeve For Shaft Repair Video