| No. | Brand | J | F | f | T | A | s | S | r |
| 5.8g | - | - | - | - | - | - | - | - | - |
| 26n | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| 1220 | SKF | - | - | - | - | - | - | - | - |
| 3d | - | - | - | - | - | - | - | - | - |
| 6207-2RS1 | SKF | - | - | - | - | - | - | - | - |
| Pe-Sb-1316 | - | - | 572.3 mm | - | - | - | - | - | - |
| 6001-ZZ | - | - | - | - | - | - | - | - | - |
| 1000mm | - | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| 24VDC | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 6.5kg | - | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| ST4276A | koyo | - | - | - | - | - | - | - | - |
| 99487 / CR 99487 Stainless Speedi Sleeve For Shaft Repair | Da:289.999 mm; P120°:133 kN; H1:169.875 mm; Mass pillow block:121 kg; End plug (suffix Y):EPR 21; R1:104.775 mm; Labyrinth ring:2 x LOR 156; Stabilizing ring:2 x 38151-38; Cap bolt recommended tightening torque:813.5 N·m; P180°:145 kN; |
| TMDT 2-40 Rotating Probe | Availability:In Stock; Limiting Speed Rating (r/min):4300; B:46mm; Dynamic Load Rating (kN):430; Weight:0.02 KGS; Cage Type:Brass; Fatigue Load Rating (kN):58; Reference Speed Rating (r/min):2800; Static Load Rating (kN):580; D:180mm; |
| TRC2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x2.4mm | Clearance:C3; SKU:23164-e1a-mb1-c3-qbl; Cage Type:Brass; B:176mm; d:320mm; Weight:0.02 KGS; Seals or Shields:Open Type; D:540mm; Availability:In Stock; |
| AS1730 Thrust Needle Roller Bearing Washer 17x30x1mm | Dynamic Load Rating (kN):4660; Clearance:C3; B:192mm; D:600mm; d:360mm; Static Load Rating (kN):7300; Weight:218.00 KGS; Limiting Speed Rating (r/min):530; Cage Type:Steel; SKU:23172ejw507c08c3-tim; |
| TRA2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x0.8mm | Basic dynamic load rating C:680 kN; r1,2 min.:2.1 mm; G1:15 mm; Fatigue load limit Pu:100 kN; G:M 155x3; Da max.:214 mm; Basic static load rating C0:1040 kN; Calculation factor e:0.3; Calculation factor Y0:2.2; Mass bearing + sleeve:11.3 kg; |
| AHX315 Withdrawal Sleeve 70x75x45mm | Mass angle ring:14.5 kg; B1:25 mm; B2:48 mm; d:480 mm; r3,4 min.:6 mm; d1 ≈:557 mm; |
| 86458 / CR86458 Stainless Speedi Sleeve For Shaft Repair | R1:120.65 mm; L:711.2 mm; J min.:549.275 mm; P120°:107 kN; J max.:619.125 mm; N1:34.925 mm; Initial grease fill:1672.65 g; Mass pillow block:172 kg; A2:339.725 mm; P150°:94.3 kN; |
| H309 Adapter Sleeve 40x65x39mm | Weight:0.02 KGS; SKU:7952ctrsump3-nsk; Static Load Rating (kN):365; D:360mm; Seals or Shields:Open Type; d:260mm; Clearance:Standard; B:46mm; Oil Limiting Speed (r/min):5700; Cage Type:Plastic; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
99596 / CR 99596 Stainless Speedi Sleeve For Shaft Repair Video