| No. | Brand | J | F | f | T | A | s | S | r |
| 20152 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 2006 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| (18mm, | - | - | - | - | - | 40 mm | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| 4*100W | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 201 | - | - | - | - | - | - | - | - | - |
| Vaa60-P | - | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| SL02 | - | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| 707-98-58240 | - | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| FTRC1024 Thrust Bearing Ring / Thrust Needle Bearing Washer 10x24x2mm | B:18mm; SKU:22205e/c3-qbl; Availability:In Stock; Weight:0.02 KGS; D:52mm; d:25mm; Clearance:C3; Cage Type:Steel; Seals or Shields:Open Type; |
| AOH30/900 (230/900CAK, 230/900CCK, 230/900CAK/W33, C30/900KM Bearing Withdrawal Sleeve) | Seals or Shields:Open Type; d:60mm; SKU:30212-koyo; Grease Limiting Speed (r/min):3500; B:23.75mm; Availability:In Stock; Dynamic Load Rating (kN):133; Static Load Rating (kN):127; Oil Limiting Speed (r/min):4700; Cage Type:Steel; |
| 150x180x15HMSA10V Shaft Oil Seal 150x180x15mm | Cage Type:Steel; B:40mm; Weight:5.62 KGS; Availability:In Stock; Seals or Shields:Open Type; SKU:6224-fag; Fatigue Load Rating (kN):6.2; Static Load Rating (kN):122; Reference Speed Rating (r/min):4300; d:120mm; |
| 86543 / CR86543 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):1760; Availability:In Stock; B:74mm; Clearance:Standard; Static Load Rating (kN):1450; Limiting Speed Rating (r/min):2600; Fatigue Load Rating (kN):170; d:180mm; D:280mm; Seals or Shields:Open Type; |
| 87196 / CR87196 Stainless Speedi Sleeve For Shaft Repair | Fatigue load limit Pu:800 kN; Thrust factor K:1.07; Basic dynamic load rating C:4650 kN; T:279.4 mm; Design variant/feature:TQOSN/GWSI; r3,4 min.:3.3 mm; Mass bearing:191 kg; Basic static load rating C0:10000 kN; Calculation factor Y1:1.25; D1 ≈:517 mm; |
| AH3238G Withdrawal Sleeve(matched Bearing:23238CAK/W33, 23238CCK/W33) | Dynamic Load Rating (kN):315; Availability:In Stock; Weight:4.11 KGS; d:120mm; B:46mm; D:180mm; Cage Type:Steel; Grease Limiting Speed (r/min):1800; SKU:23024cdke4-nsk; Static Load Rating (kN):525; |
| 45 mm x 100 mm x 25 mm AHX320 Withdrawal Sleeves 95x100x59mm | Weight:0.20 KGS; SKU:638-zen; B:9mm; Clearance:Standard; Availability:In Stock; d:8mm; Seals or Shields:Open Type; D:28mm; Cage Type:Steel; Size (mm):45 mm x 100 mm x 25 mm ; |
| EAZ 180 Induction Heater | Oil Limiting Speed (r/min):12000; Fatigue Load Rating (kN):3.05; D:150mm; Grease Limiting Speed (r/min):8000; Preload:Light; Cage Type:Plastic; B:24mm; Clearance:Standard; Static Load Rating (kN):80; d:100mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
99571 / CR 99571 Stainless Speedi Sleeve For Shaft Repair Video