| No. | Brand | J | F | f | T | A | s | S | r |
| IP65 | - | - | - | - | - | - | - | - | - |
| CL2B-DAL2 | - | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| RV025-RV150 | - | - | - | - | - | - | - | - | - |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| 4*100W | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| 6207-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 65ml-33g | - | - | - | - | - | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| RKS062 | SKF | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| D3W1CNYC | Parker | - | - | - | - | - | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| 5421 | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 84962 / CR84962 Stainless Speedi Sleeve For Shaft Repair | Accessories:Two Shields; B:38.00 mm; Sealed Speed Rating n3:1600 rpm; Basic Dynamic Radial Load Rating C:143000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:143000 N; d:160.000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:240.0000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; |
| 85535 / CR85535 Stainless Speedi Sleeve For Shaft Repair | A2:358.775 mm; P180°:222 kN; h:62.706 mm; Eye bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-40-34; R2:42.862 mm; Ca:107.798 mm; H:419.1 mm; da:182.563 mm; L:749.3 mm; |
| TMDT 2-43 Heavy Duty Surface Probe | Fillet Radius ra:1.00 mm; Speed Rating-Single and Double Sealed Grease SDG:5600 rpm; Basic Interchange FAF:-; Old MRC Bearing Number:208FS; Width - Outer Ring B0:21.0 mm; Accessories:8000 One Seal; Width - Inner Ring B1:24.00 mm; Basic Interchange BCA:8508; Basic Interchange NDH:8508; Basic Radial Load Rating-Static SCO:18000 N; |
| 99338 / CR99338 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; Seals or Shields:Two Metal Shields; B:2.5mm; Availability:In Stock; SKU:mr63-2z-zen; Clearance:Standard; Weight:0.20 KGS; D:6mm; d:3mm; |
| TRA2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x0.8mm | Basic dynamic load rating C:680 kN; r1,2 min.:2.1 mm; G1:15 mm; Fatigue load limit Pu:100 kN; G:M 155x3; Da max.:214 mm; Basic static load rating C0:1040 kN; Calculation factor e:0.3; Calculation factor Y0:2.2; Mass bearing + sleeve:11.3 kg; |
| 87298 / CR87298 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Plastic; Availability:In Stock; Clearance:C3; Grease Limiting Speed (r/min):12000; Weight:0.02 KGS; Oil Limiting Speed (r/min):14000; d:25mm; Static Load Rating (kN):3.3; B:15mm; Seals or Shields:Open Type; |
| AOH32/900 (232/900CAK/W33, 232/900CAK, 232/900CCK, 232/900CCK/W33 Bearing Withdrawal Sleeve) | Span B:2.219 in; Dimension C:1.0000 in; Basic Radial Load Rating-Dynamic DC:1990 lbf; Total Length A:3.000 in; Basic Radial Load Rating-Static SCO:1270 lbf; MRC Bearing Number (MRC):CONV-504-3; MRC Bearing Number (MRC) :D3000; Variant:CONV-504-3; |
| ZM80 Precision Locknut (M80x2)x105x18mm | D:210mm; Seals or Shields:Open Type; Weight:0.12 KGS; Availability:In Stock; B:52mm; d:85mm; Cage Type:Steel; SKU:6417-qbl; Clearance:Standard; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
99525 / CR 99525 Stainless Speedi Sleeve For Shaft Repair Video