| No. | Brand | J | F | f | T | A | s | S | r |
| 52x | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| ZAX330-3 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| F12 | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| SR45TB1SS | thk | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| 4WE6D53/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| NUP236E.M1.C2 | fag | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| AH3156H Withdrawal Sleeve Supplier | Oil Limiting Speed (r/min):26000; Fatigue Load Rating (kN):0.62; B:13mm; Preload:Medium; SKU:71911cd/p4adgb-skf; Clearance:Standard; D:80mm; Weight:0.18 KGS; Availability:In Stock; Dynamic Load Rating (kN):19.5; |
| TRB4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x1.6mm | B:2.25 Inch; SKU:mjt6-rhp; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; d:6 Inch; D:12 Inch; |
| TKDT 10 Contact Thermometer | Basic static load rating C0:500 kN; d1 ≈:120.76 mm; r3,4 min.:2.5 mm; Basic dynamic load rating C:404 kN; d:80 mm; Limiting speed:4000 r/min; a:40.528 mm; Cb min.:13.5 mm; Dimension series:2GD; Ca min.:7 mm; |
| 86413 / CR86413 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:41000 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Sealed Speed Rating n3:3600 rpm; d:70.000 mm; D:110.0000 mm; Accessories:Without Accessories; B:20.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Static Radial Load Rating Co:32500 N; |
| HMV22E / HMV 22E Hydraulic Nut (M110x2)x178x44mm | d:80mm; Weight:0.02 KGS; D:140mm; Reference Speed Rating (r/min):5300; Cage Type:Plastic; Limiting Speed Rating (r/min):5300; B:26mm; SKU:7216bep-skf; Static Load Rating (kN):69.5; Seals or Shields:Open Type; |
| CR99841 Stainless Steel Speedi Sleeve For Shaft Repair | Grease Speed Rating Open/Shielded n1:8500 rpm; B:9.00 mm; Basic Dynamic Radial Load Rating C:8320 N; d:55.000 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:7350 N; Sealed Speed Rating n3:5180 rpm; Fillet Radius ra:0.30 mm; D:72.0000 mm; Accessories:Two Seals; |
| 86441 / CR86441 Stainless Speedi Sleeve For Shaft Repair | SKU:6311 -timken; Static Load Rating (kN):44.6; Availability:In Stock; Limiting Speed Rating (r/min):6700; D:120mm; Clearance:Standard; Seals or Shields:Open Type; Dynamic Load Rating (kN):71.5; d:55mm; Reference Speed Rating (r/min):10000; |
| BIC2030 Inner Ring 30x38.2x22mm | Cage Type:Steel; B:51mm; SKU:22314eae4-nsk; d:70mm; Static Load Rating (kN):435; Oil Limiting Speed (r/min):3400; Clearance:Standard; Seals or Shields:Open Type; Grease Limiting Speed (r/min):2800; Availability:In Stock; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
99490 / CR 99490 Stainless Speedi Sleeve For Shaft Repair Video