| No. | Brand | J | F | f | T | A | s | S | r |
| 10.9 | - | - | - | - | - | - | - | - | - |
| A302R | INA | - | - | - | - | - | - | - | - |
| A4VG | Rexroth | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | 304.8 mm | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | - | - | - | - | - | - | - |
| 7317BYG | SKF | - | - | - | - | - | - | - | - |
| IR110X120X30 | INA | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| 5-Pack | - | - | - | - | - | - | - | - | - |
| 21311 | NSK | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| Ba180-a | - | - | - | - | - | - | - | - | - |
| 90179 / CR90179 Stainless Speedi Sleeve For Shaft Repair | D:110mm; Fatigue Load Rating (kN):1.86; Availability:In Stock; Dynamic Load Rating (kN):48.8; Weight:0.60 KGS; Grease Limiting Speed (r/min):11000; Preload:Light; Seals or Shields:Open Type; d:70mm; B:20mm; |
| AH2356G Withdrawal Sleeve Supplier | d:140mm; SKU:6028 -timken; Reference Speed Rating (r/min):5600; Dynamic Load Rating (kN):110; Weight:3.50 KGS; Availability:In Stock; Static Load Rating (kN):101.8; Cage Type:Steel; Clearance:Standard; Limiting Speed Rating (r/min):3800; |
| AOHX241/600 (241/600CAK, 241/600CCK, 241/600ECAK30/W33 Bearing Withdrawal Sleeve) | Static Load Rating (kN):66; Availability:In Stock; d:105mm; D:160mm; B:26mm; Weight:1.58 KGS; Cage Type:Steel; Dynamic Load Rating (kN):72.5; Seals or Shields:Two Rubber Seals; Clearance:C3; |
| TKES 10A Endoscope | d:85.000 mm; Basic Static Radial Load Rating Co:19600 N; Grease Speed Rating Open/Shielded n1:5300 rpm; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:19500 N; B:13.00 mm; Accessories:One Seal; |
| 85179 / CR85179 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; B:0.563 inch; d:0.75 inch; Clearance:Standard; D:1.875 inch; Seals or Shields:Two Rubber Seals; Availability:In Stock; SKU:lj3/4-2rs-r&m; |
| AOH3152G(23152CCK, 23152CAK, 23152CCK/W33, C3152K Bearing Withdrawal Sleeve) | B:24mm; Dynamic Load Rating (kN):66.3; Grease Limiting Speed (r/min):9500; Preload:Light; SKU:7214acdga/p4a-skf; Static Load Rating (kN):55; Weight:1.10 KGS; d:70mm; Clearance:Standard; Fatigue Load Rating (kN):2.36; |
| CP7140180 Thrust Plate 140x178.7x7mm | SKU:2212e-2rs1tn9-skf; D:110mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):31.2; Static Load Rating (kN):12.2; Availability:In Stock; Limiting Speed Rating (r/min):3800; Fatigue Load Rating (kN):0.62; B:28mm; Weight:0.02 KGS; |
| CR99266 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Limiting Speed Rating (r/min):3600; Weight:0.02 KGS; D:230mm; Reference Speed Rating (r/min):2600; Availability:In Stock; Cage Type:Steel; Fatigue Load Rating (kN):88; Dynamic Load Rating (kN):735; SKU:22226e/c3-skf; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
99473 / CR 99473 Stainless Speedi Sleeve For Shaft Repair Video