| No. | Brand | J | F | f | T | A | s | S | r |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| ISO9001 | INA | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 3026 | - | - | - | - | - | - | - | - | - |
| 60062RSC3GSR | koyo | - | - | - | - | - | - | - | - |
| NU2219-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| M16 | Thomson | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Chloride30% | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | 350 mm | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| 5PCS | - | - | - | - | - | - | - | - | - |
| MSR22x1.5 Precision Locknut / MSR-M22x1.5 Locking Nut (M22x1.5)x40x18mm | Weight:0.02 KGS; B:23mm; D:72mm; Cage Type:Steel; SKU:22207-e1-k-qbl; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; |
| CR99220 Stainless Steel Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):9500; Weight:0.52 KGS; Cage Type:Brass; Seals or Shields:Open Type; Fatigue Load Rating (kN):2.55; Availability:In Stock; Dynamic Load Rating (kN):62; Static Load Rating (kN):51; d:35mm; SKU:qj307-mpa-c3-fag; |
| 87069 / CR87069 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; d:150mm; Clearance:Standard; Weight:1.16 KGS; Seals or Shields:Open Type; SKU:61830-fag; Cage Type:Steel; D:190mm; Fatigue Load Rating (kN):2.42; B:20mm; |
| 86169 / CR86169 Stainless Speedi Sleeve For Shaft Repair | da max.:84 mm; K:7 mm; Da max.:116.5 mm; r5 min.:0.6 mm; Da min.:109 mm; Calculation factor Y1:1.7; Fatigue load limit Pu:60 kN; d:75 mm; T:74 mm; r3,4 min.:1.5 mm; |
| CPR85095 Thrust Plate 50x95x8mm | Clearance:C4; Grease Limiting Speed (r/min):950; Static Load Rating (kN):1750; Availability:In Stock; Oil Limiting Speed (r/min):1200; B:100mm; Dynamic Load Rating (kN):965; D:280mm; SKU:24036ce4c4-nsk; Weight:22.70 KGS; |
| CR99829 Stainless Steel Speedi Sleeve For Shaft Repair | B:6 mm; ra max.:0.3 mm; Fatigue load limit Pu:0.036 kN; Limiting speed:48000 r/min; D:17 mm; da min.:7.7 mm; Basic dynamic load rating C:1.95 kN; Da max.:15 mm; d2 ≈:8.2 mm; Calculation factor f0:11.4; |
| CR99869 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:9500 rpm; Basic Dynamic Radial Load Rating C:30200 N; Grease Speed Rating n1:7000 rpm; D:62.0000 mm; d:30.000 mm; Accessories:One Seal & Snap-Ring; B:23.80 mm; Sealed Speed Rating n3:7000 rpm; |
| TRB2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x1.6mm | Limiting speed:1000 r/min; Calculation factor e:0.31; Basic static load rating C0:6800 kN; D1 ≈:498 mm; B1:225 mm; Fatigue load limit Pu:480 kN; D:580 mm; d1:320 mm; Reference speed:800 r/min; K:12 mm; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
99463 / CR 99463 Stainless Speedi Sleeve For Shaft Repair Video