| No. | Brand | J | F | f | T | A | s | S | r |
| 17" | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6063 | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| 8-10 | - | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| 99002 | - | - | - | - | - | - | - | - | - |
| VOE14521451 | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 74 mm | - | - | - | - |
| 10'' | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| NU2316 | - | - | - | 8 mm | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| HMV46E / HMV 46E Hydraulic Nut 232x318x53mm | B:12.5 mm; Mass inner ring:0.0052 kg; F:13 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
| TRA3446 Thrust Bearing Ring / Thrust Needle Bearing Washer 53.975x73.025x0.8mm | P90°:32.5 kN; Mass pillow block:12.7 kg; RG:1/4 NPT; h:28.575 mm; End plug (suffix Y):EPR 7; PosiTrac Plus contact element:2 x B10724-37; P150°:18.2 kN; J max.:244.475 mm; P120°:20 kN; P180°:22.2 kN; |
| CPR10100170 Thrust Plate 100x170x10mm | Seals or Shields:Open Type; Oil Limiting Speed (r/min):3600; Clearance:Standard; Weight:0.02 KGS; Dynamic Load Rating (kN):124600; SKU:3218m-nsk; Availability:In Stock; Cage Type:Brass; d:90mm; B:52.4mm; |
| TRD815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x3.2mm | da:38.1 mm; A1:75.406 mm; Basic dynamic load rating C:73.8 kN; d2:62.706 mm; B:69.85 mm; S:0.794 mm; Mass bearing unit:3.63 kg; A:60.325 mm; s:25.4 mm; H1:53.975 mm; |
| 86429 / CR86429 Stainless Speedi Sleeve For Shaft Repair | SKU:6015 c3-timken; d:75mm; Limiting Speed Rating (r/min):6000; D:115mm; Cage Type:Steel; Weight:0.65 KGS; Static Load Rating (kN):33.1; Seals or Shields:Open Type; Availability:In Stock; Reference Speed Rating (r/min):8700; |
| 90120 / CR90120 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:38mm; Cage Type:Plastic; Speed Rating (r/min):7200; Availability:In Stock; Dynamic Load Rating (kN):160.1; d:110mm; Clearance:Standard; D:200mm; Weight:4.49 KGS; |
| AH309 Withdrawal Sleeve 40x45x31mm | D:110mm; Limiting Speed Rating (r/min):6100; B:27mm; Fatigue Load Rating (kN):--; Cage Type:Steel; d:50mm; Static Load Rating (kN):38.3; Availability:In Stock; SKU:6310-zz/c3-koyo; Seals or Shields:Two Metal Shields; |
| AH326 Withdrawal Sleeve 125x130x74mm | B:36.5mm; Weight:0.02 KGS; Availability:In Stock; D:110mm; Seals or Shields:Open Type; SKU:3212a-qbl; d:60mm; Clearance:Standard; Cage Type:Steel; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
99438 / CR99438 Stainless Speedi Sleeve For Shaft Repair Video