| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (80W | - | - | - | - | - | - | - | - | - |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| 1W | - | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| ST4276A | koyo | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| 6mm | - | - | 45 mm | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| 317-8021 | INA | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| GU10 | - | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| 1040T | Rexnord | - | - | - | - | - | - | - | - |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 89943 / CR89943 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):4.5; Weight:0.02 KGS; B:7mm; Limiting Speed Rating (r/min):15000; Static Load Rating (kN):3.4; Clearance:Standard; Seals or Shields:Two Metal Shields; Cage Type:Steel; Reference Speed Rating (r/min):18000; Availability:In Stock; |
| 90800 / CR90800 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:0.30 mm; D:19.0000 mm; Basic Static Radial Load Rating Co:950 N; Accessories:One Seal; B:6.00 mm; Basic Dynamic Radial Load Rating C:2210 N; d:6.000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm; Sealed Speed Rating n3:26000 rpm; |
| 84819 / CR84819 Stainless Speedi Sleeve For Shaft Repair | d:34.98mm; B:15.875mm; Weight:0.02 KGS; Static Load Rating (kN):48.5; Clearance:Standard; Oil Limiting Speed (r/min):8500; Fatigue Load Rating (kN):6.85; Cage Type:Steel; SKU:l68149/l68110-koyo; Grease Limiting Speed (r/min):6400; |
| AS150190 Thrust Needle Roller Bearing Washer 150x190x1mm | Clearance:Standard; Availability:In Stock; Fatigue Load Rating (kN):1.08; d:90mm; SKU:1218/w64-skf; Seals or Shields:Open Type; Limiting Speed Rating (r/min):5300; B:30mm; D:160mm; Weight:2.50 KGS; |
| CR99139 Stainless Steel Speedi Sleeve For Shaft Repair | d:50.000 mm; Basic Static Radial Load Rating Co:27000 N; Grease Speed Rating n1:6400 rpm; Oil Speed Rating n2:8300 rpm; Basic Dynamic Radial Load Rating C:33200 N; Fillet Radius rb:0.60 mm; D:90.0000 mm; B:20.00 mm; Fillet Radius ra:1.00 mm; |
| AOH2352G(23252CCK/W33, 22352CCK/W33,23252CAK/W33, 22352CAK/W33 Bearing Withdrawal Sleeve) | Reference Speed Rating (r/min):18000; Static Load Rating (kN):19; Cage Type:Steel; Dynamic Load Rating (kN):32.5; SKU:6208-2znr-skf; d:40mm; Clearance:Standard; Weight:0.02 KGS; D:80mm; Seals or Shields:Two Metal Shields; |
| 99284 / CR99284 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):9.7; Cage Type:Steel; Seals or Shields:Open Type; Clearance:Standard; d:12mm; Reference Speed Rating (r/min):--; D:37mm; Availability:In Stock; Weight:0.02 KGS; Limiting Speed Rating (r/min):20000; |
| TRE1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x4mm | Seals or Shields:Open Type; B:86mm; Cage Type:Steel; SKU:22236-e1-k-c3-qbl; d:180mm; D:320mm; Clearance:C3; Weight:0.02 KGS; Availability:In Stock; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
99412 / CR99412 Stainless Speedi Sleeve For Shaft Repair Video