| No. | Brand | J | F | f | T | A | s | S | r |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 22310E/C4 | SKF | - | - | - | - | - | - | - | - |
| 9o-1b20-0223-0547-1 | - | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| MB5209XP | - | - | - | - | - | - | - | - | - |
| GU10 | - | - | - | - | - | - | - | - | - |
| 6202-2RS | - | - | - | - | - | - | - | - | - |
| 61804-2RS | INA | - | - | - | - | - | - | - | - |
| Max40d | - | - | - | - | - | - | - | - | - |
| Ec360 | - | - | - | - | - | - | - | - | - |
| Rasey1-N-HLC | INA | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 60/120LEDs | - | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| SL02 | - | - | - | - | - | - | - | - | - |
| CR99179 Stainless Steel Speedi Sleeve For Shaft Repair | Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:117000 N; D:190.0000 mm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:3200 rpm; B:43.00 mm; d:90.000 mm; Basic Static Radial Load Rating Co:44000 N; |
| AOH24096 (24096ECAK30/W33, 24096CCK, 24096CAK Bearing Withdrawal Sleeve) | B:13.00 mm; Basic Static Radial Load Rating Co:2600 N; Oil Speed Rating n2:20000 rpm; Basic Dynamic Radial Load Rating C:10800 N; Fillet Radius ra:1.00 mm; D:42.0000 mm; d:15.000 mm; Grease Speed Rating n1:17000 rpm; |
| H312 Adapter Sleeve 55x80x47mm | Availability:In Stock; d:280mm; Cage Type:Brass; Clearance:Standard; D:460mm; Dynamic Load Rating (kN):2780; Seals or Shields:Open Type; SKU:23156embw507c08-timk; Limiting Speed Rating (r/min):770; Weight:96.80 KGS; |
| AH24130 Withdrawal Sleeve(matched Bearing:24130CCK,24130CAK, C4130K) | Dynamic Load Rating (kN):75; D:110mm; Seals or Shields:Open Type; Availability:In Stock; SKU:7310becbj-skf; Static Load Rating (kN):51; Cage Type:Steel; Reference Speed Rating (r/min):8000; B:27mm; Fatigue Load Rating (kN):2.16; |
| TRD1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x3.2mm | D:90mm; SKU:2210-tvh-c3-fag; Weight:0.56 KGS; Clearance:C3; Dynamic Load Rating (kN):28.5; d:50mm; Reference Speed Rating (r/min):8000; Cage Type:Plastic; B:23mm; Limiting Speed Rating (r/min):8000; |
| AOH24168(24168CCK, 24168CAK, 24168ECCK30/W33 Bearing Withdrawal Sleeve) | SKU:6314ddu-nsk; Weight:2.57 KGS; Cage Type:Steel; Availability:In Stock; D:150mm; Grease Limiting Speed (r/min):3200; Seals or Shields:Two Rubber Seals; B:35mm; Dynamic Load Rating (kN):104; d:70mm; |
| CP32542 Thrust Plate 25x41.5x3mm | P60°:35.1 kN; Bearing:1309 EKTN9; ba:25.4 mm; RG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; J max.:200.025 mm; H2:25.4 mm; H1:69.85 mm; Mass pillow block:8.68 kg; Housing:SAF 609; |
| AH209 Withdrawal Sleeve 40x45x26mm | Clearance:Standard; Seals or Shields:Open Type; Cage Type:Steel; d:70mm; B:35mm; Reference Speed Rating (r/min):8500; SKU:1314-skf; Weight:0.02 KGS; Fatigue Load Rating (kN):1.34; Limiting Speed Rating (r/min):6000; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
99855 / CR99855 Stainless Speedi Sleeve For Shaft Repair Video