| No. | Brand | J | F | f | T | A | s | S | r |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| (BDZ-155-A(ZA-2)) | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| CL2B-KA168-2 | - | - | - | - | - | - | - | 4.763 mm | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| Rhb306 | - | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| 10-30 | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 606ZZ | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| AOH31/900 (231/900CAK/W33, 231/900CAK, 231/900CCK, 231/900CCK/W33 Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Availability:In Stock; Dynamic Load Rating (kN):10.1; Reference Speed Rating (r/min):--; Weight:0.02 KGS; Clearance:Standard; d:25mm; B:12mm; Static Load Rating (kN):5.85; D:47mm; |
| MSR40x1.5 Precision Locknut / MSR-M40x1.5 Locking Nut (M40x1.5)x58x22mm | Thrust factor K:1.99; Basic static load rating C0:22400 kN; Calculation factor Y2:3.4; Calculation factor Y1:2.3; B:450 mm; T:450 mm; d1 ≈:510 mm; D:660 mm; Comparative radial load rating CF:2320 kN; r3,4 min.:6 mm; |
| AOH240/500 (240/500ECAK30/W33, 240/500CAK, 240/500CCK Bearing Withdrawal Sleeve) | d:120mm; Availability:In Stock; Limiting Speed Rating (r/min):2600; B:86mm; Fatigue Load Rating (kN):103; Dynamic Load Rating (kN):1080; SKU:22324-e1-t41d-fag; Weight:0.02 KGS; Cage Type:Steel; Static Load Rating (kN):1170; |
| AH24168H Withdrawal Sleeve Supplier | Availability:In Stock; Oil Limiting Speed (r/min):6300; Weight:1.00 KGS; D:120mm; Seals or Shields:Two Metal Shields; Static Load Rating (kN):40; Clearance:Standard; SKU:6213zz-nsk; Cage Type:Steel; d:65mm; |
| FTRE4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x3mm | B:20 mm; Specific dynamic load factor K:10 N/mm²; d:18 mm; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; Mass bushing:0.032 kg; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; |
| AOH24088 (24088ECAK30/W33, 24088CAK, 24088CCK Bearing Withdrawal Sleeve | RG:1/4-28 UNF; Thread grub screw G2:M6; Bearing:YSPAG 207-107; Limiting speed:1100 r/min; Db1:87 mm; Recommended tightening torque for grub screw:7.4 N·m; L:118 mm; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; A:34.5 mm; |
| AOHX3288G (23288CAK/W33, 23288CAK, 23288CCK Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):32000; Reference Speed Rating (r/min):32500; Fatigue Load Rating (kN):0.053; B:6mm; Clearance:Standard; Seals or Shields:Single Metal Shield; Availability:In Stock; D:19mm; d:6mm; Static Load Rating (kN):1.1; |
| CR99141 Stainless Steel Speedi Sleeve For Shaft Repair | d:15mm; Clearance:Standard; D:35mm; Dynamic Load Rating (kN):13.7; Static Load Rating (kN):10.4; Cage Type:Plastic; B:11mm; Speed Rating (r/min):6400; Weight:0.05 KGS; Seals or Shields:Open Type; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
99364 / CR99364 Stainless Speedi Sleeve For Shaft Repair Video