| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| PartsSH100 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| SL192317 | - | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 17" | - | - | - | - | - | - | - | - | - |
| 37X13.50R20 | - | - | - | - | - | - | - | - | - |
| T73T-1217 | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| CPR990155 Thrust Plate 90x155x9mm | Dynamic Load Rating (kN):16.8; Clearance:C3; Static Load Rating (kN):7.8; D:52mm; B:15mm; Condition:New; Cage Type:Steel; Limiting Speed Rating (r/min):9500; Weight:0.02 KGS; SKU:6304-2rsh/c3gjn-skf; |
| 90120 / CR90120 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:38mm; Cage Type:Plastic; Speed Rating (r/min):7200; Availability:In Stock; Dynamic Load Rating (kN):160.1; d:110mm; Clearance:Standard; D:200mm; Weight:4.49 KGS; |
| 86468 / CR86468 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; D:85.0000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:32500 N; Basic Dynamic Radial Load Rating C:39300 N; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; |
| CR99116 Stainless Steel Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):3000; Clearance:C2; Weight:10.20 KGS; B:67mm; Cage Type:Steel; Availability:In Stock; D:200mm; Seals or Shields:Open Type; d:95mm; Static Load Rating (kN):774; |
| CP21932 Thrust Plate 19x31.5x2mm | Availability:In Stock; SKU:60152rsc3-timken; Dynamic Load Rating (kN):40.1; Static Load Rating (kN):33.1; Reference Speed Rating (r/min):8700; Seals or Shields:Two Rubber Seals; Clearance:C3; Limiting Speed Rating (r/min):6000; B:20mm; Weight:0.65 KGS; |
| 87247 / CR87247 Stainless Speedi Sleeve For Shaft Repair | B:58.7mm; Clearance:Standard; d:65mm; D:140mm; Weight:0.02 KGS; SKU:3313dnrcbm-qbl; Seals or Shields:Open Type; Cage Type:Brass; Availability:In Stock; |
| FTRA7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x1mm | Dynamic Load Rating (kN):39.3; B:24mm; Availability:In Stock; Weight:1.29 KGS; Static Load Rating (kN):48.2; Clearance:Standard; SKU:2mmv9120hxcrdul-timk; D:150mm; Seals or Shields:Open Type; Speed Rating (r/min):10800; |
| TRA5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x0.8mm | Basic Dynamic Radial Load Rating C:975000 N; Basic Static Radial Load Rating Co:1930000 N; B:190.00 mm; D:500.0000 mm; Fillet Radius rb:1.50 mm; Grease Speed Rating n1:1000 rpm; Oil Speed Rating n2:1400 rpm; d:240.000 mm; Fillet Radius ra:4.00 mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
99312 / CR99312 Stainless Speedi Sleeve For Shaft Repair Video