| No. | Brand | J | F | f | T | A | s | S | r |
| 5182 | - | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| SL01 | - | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| NATR6-PP-A | INA | - | - | - | - | - | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 40W | - | - | - | - | - | - | - | - | - |
| 3200W | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| C500S | - | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| 750 | fag | - | - | - | - | - | - | - | - |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| AHX214 Withdrawal Sleeve 65x70x33.5mm | Basic static load rating C0:56 kN; B:20 mm; Da max.:57 mm; Calculation factor kr:0.3; das:42.8 mm; da min.:40 mm; E:55.52 mm; Basic dynamic load rating C:48.4 kN; Calculation factor e:0.3; Mass bearing:0.26 kg; |
| AHX3076 Withdrawal Sleeve 360x380x170mm | Fatigue Load Rating (kN):11.2; Seals or Shields:Open Type; Reference Speed Rating (r/min):4000; Availability:In Stock; d:110mm; B:38mm; Cage Type:Brass; D:200mm; SKU:qj222n2ma/c3-skf; Weight:5.60 KGS; |
| H2318 Adapter Sleeves 80x120x86mm | d:15mm; B:13mm; Clearance:Standard; D:42mm; SKU:7302beat85-nsk; Cage Type:Plastic; Availability:In Stock; Weight:0.09 KGS; Static Load Rating (kN):6.9; Dynamic Load Rating (kN):13.6; |
| CR99866 Stainless Steel Speedi Sleeve For Shaft Repair | D:16mm; Clearance:Standard; Weight:0.20 KGS; Seals or Shields:Two Rubber Seals; Availability:In Stock; Cage Type:Steel; d:5mm; B:5mm; SKU:625-2rs-zen; |
| TMDT 2-43 Heavy Duty Surface Probe | Fillet Radius ra:1.00 mm; Speed Rating-Single and Double Sealed Grease SDG:5600 rpm; Basic Interchange FAF:-; Old MRC Bearing Number:208FS; Width - Outer Ring B0:21.0 mm; Accessories:8000 One Seal; Width - Inner Ring B1:24.00 mm; Basic Interchange BCA:8508; Basic Interchange NDH:8508; Basic Radial Load Rating-Static SCO:18000 N; |
| TRC4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x2.4mm | Cage Type:Steel; Clearance:Standard; d:30mm; Weight:0.02 KGS; D:72mm; SKU:3306a-qbl; Seals or Shields:Open Type; Availability:In Stock; B:30.2mm; |
| HMV29E / HMV 29E Hydraulic Nut (M145x2)x214x46mm | Seals or Shields:Two Metal Shields; SKU:e2.626-2z/c3-skf; Weight:0.01 KGS; Availability:In Stock; Clearance:C3; Cage Type:Steel; |
| CR99120 Stainless Steel Speedi Sleeve For Shaft Repair | d:30.000 mm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating n1:10000 rpm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:19500 N; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating n2:13000 rpm; B:16.00 mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
99301 / CR99301 Stainless Speedi Sleeve For Shaft Repair Video