| No. | Brand | J | F | f | T | A | s | S | r |
| 15mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 21311 | NSK | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| A4VG | Rexroth | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 18mm, | - | - | - | - | - | - | - | - | - |
| 45% | - | - | - | - | - | - | - | 4.763 mm | - |
| x320 | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 62/22 | koyo | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| AHX315 Withdrawal Sleeve 70x75x45mm | Mass angle ring:14.5 kg; B1:25 mm; B2:48 mm; d:480 mm; r3,4 min.:6 mm; d1 ≈:557 mm; |
| TRD2233 Thrust Bearing Ring / Thrust Needle Bearing Washer 34.925x52.375x3.2mm | d:60mm; B:46mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):310; Limiting Speed Rating (r/min):5300; Reference Speed Rating (r/min):4000; SKU:22312e/c3-skf; Fatigue Load Rating (kN):36.5; Weight:0.02 KGS; Cage Type:Steel; |
| AH220 Withdrawal Sleeve 95x100x45mm | Clearance:Standard; Cage Type:Steel; Weight:1.15 KGS; Oil Limiting Speed (r/min):3800; d:150mm; Availability:In Stock; Static Load Rating (kN):58.5; Seals or Shields:Non-Contact Seal; B:20mm; D:190mm; |
| AOHX31/500G (231/500CAK/W33, C31/500KM, 231/500CAK, 231/500CCK Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):265; Reference Speed Rating (r/min):1200; D:460mm; Clearance:Standard; Seals or Shields:Open Type; B:118mm; Dynamic Load Rating (kN):2120; d:300mm; Cage Type:Steel; Availability:In Stock; |
| CR99167 Stainless Steel Speedi Sleeve For Shaft Repair | P120°:280 kN; H1:112 mm; Housing:FSNL 520-617 RU; A2:181 mm; Bearing (basic designation):2220 K; P0°:470 kN; N:24 mm; Oil seal:2 x TSN 520 U; Cap bolt, rec. tightening torque:200 N·m; Locating ring:2 x FRB 12/180; |
| AOH241/1000 (241/1000ECAK30/W33, 241/1000ECAK, 241/1000CCK, 241/1000CCK/W33 Bearing Withdrawal Sleeve) | rb max.:6 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Mass plain bearing:593 kg; da max.:722 mm; Basic static load rating C0:91500 kN; dk:785 mm; ra max.:3 mm; Specific dynamic load factor K:300 N/mm²; r1 min.:3 mm; B:308 mm; |
| AH30/850 Withdrawal Sleeve 800x850x325mm | Ew:5 mm; Basic static load rating C0:1.53 kN; Basic dynamic load rating C:1.68 kN; Fatigue load limit Pu:0.153 kN; Reference speed:40000 r/min; Mass needle roller and cage assembly:0.0004 kg; U:9 mm; Limiting speed:45000 r/min; Fw:3 mm; |
| FTRE85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x3mm | SKU:22217ek/c4-qbl; d:85mm; Cage Type:Steel; Seals or Shields:Open Type; D:150mm; Weight:0.02 KGS; B:36mm; Availability:In Stock; Clearance:C4; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
99281 / CR99281 Stainless Steel Speedi Sleeve For Shaft Repair Video