| No. | Brand | J | F | f | T | A | s | S | r |
| 962985 | - | - | - | - | - | - | - | - | - |
| SK210LC-8 | INA | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 30mm | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 52x | - | - | - | - | - | - | - | - | - |
| NATR6-PP-A | INA | - | - | - | - | - | - | - | - |
| 8x8 | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| 650 | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 10'' | - | - | - | - | - | - | - | - | - |
| 1220 | SKF | - | - | - | - | - | - | - | - |
| MM212KS2CR | FAFNIR | - | - | - | - | - | - | - | - |
| 750 | fag | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | 114.3 mm | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| SHF20-XRB | - | - | - | - | - | - | - | - | - |
| NU2315-E-XL-M1A-C3 | fag | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| CR99845 Stainless Steel Speedi Sleeve For Shaft Repair | D:85mm; Cage Type:Plastic; Weight:0.02 KGS; B:23mm; SKU:2209ektn9-qbl; Availability:In Stock; d:45mm; Seals or Shields:Open Type; Clearance:Standard; |
| AS0619 Thrust Needle Roller Bearing Washer 6x19x1mm | Cage Type:Steel; Availability:In Stock; Weight:0.02 KGS; D:180mm; B:34mm; Seals or Shields:Open Type; SKU:1220-qbl; d:100mm; Clearance:Standard; |
| CP35070 Thrust Plate 50x69.4x3mm | B:29mm; Cage Type:Steel; Limiting Speed Rating (r/min):4500; Availability:In Stock; D:120mm; Reference Speed Rating (r/min):5500; Weight:1.60 KGS; d:55mm; Clearance:C3; Static Load Rating (kN):176; |
| 87723 / CR87723 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:4800 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:8000 N; Grease Speed Rating Open/Shielded n1:7500 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:9000 rpm; Fillet Radius ra:0.30 mm; D:78.0000 mm; Basic Dynamic Radial Load Rating C:8710 N; B:10.00 mm; |
| FTRD90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x2.5mm | Basic Dynamic Radial Load Rating 15 B Bearing C2:108000 N; d:65.000 mm; Basic Static Radial Load Rating 40 AA Pair Co1:224000 N; Angle Third:40 º; Basic Dynamic Radial Load Rating 40 AA Pair C1:208000 N; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating 15 B Bearing Co2:80000 N; Fillet Radius rb:1.00 mm; B:99.00 mm; Grease Speed Rating n1:4300 rpm; |
| AH3156GH Withdrawal Sleeve Supplier | B:60mm; Availability:In Stock; SKU:22317-e1-c3-fag; Static Load Rating (kN):560; Fatigue Load Rating (kN):50; d:85mm; Weight:0.02 KGS; Cage Type:Steel; D:180mm; Clearance:C3; |
| TRE512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x4mm | Dw:2 mm; r1 max.:0.6 mm; r1,2 min.:0.2 mm; r2 max.:0.8 mm; Mass needle roller:0.44 g; Lw:17.8 mm; |
| CP3047 Thrust Plate 30x46.5x0.8mm | Static Load Rating (kN):58.5; Limiting Speed Rating (r/min):8500; Availability:In Stock; Seals or Shields:Open Type; D:130mm; B:25mm; Fatigue Load Rating (kN):4.2; SKU:7215-b-mp-p6-ua-fag; Clearance:Standard; d:75mm; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99276 Stainless Steel Speedi Sleeve For Shaft Repair Video