| No. | Brand | J | F | f | T | A | s | S | r |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 56650 | Timken | - | - | - | - | - | - | - | - |
| 6001-ZZ | - | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 2 | - | - | - | - | - | - | - | - | - |
| 12229-16G00-0B0 | - | - | - | - | - | - | - | - | - |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | 46.4 mm | 34.5 mm | - | - | - |
| TRA5118 | - | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| 45% | - | - | - | - | - | - | - | 4.763 mm | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 12m | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 0820215004 | Rexroth | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| VHIS 35 Bearing Induction Heater | Availability:In Stock; Weight:1.20 KGS; Oil Limiting Speed (r/min):8000; Seals or Shields:Open Type; Fatigue Load Rating (kN):12.9; B:24mm; SKU:n1018ktn9/sp-skf; Clearance:Standard; Dynamic Load Rating (kN):79.2; Grease Limiting Speed (r/min):7000; |
| CR99268 Stainless Steel Speedi Sleeve For Shaft Repair | B:30 mm; Tolerance shaft:f7 m/s; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Mass bushing:0.1 kg; D:55 mm; d:50 mm; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; |
| EAZ 174 Induction Heater | Dynamic Load Rating (kN):365; Static Load Rating (kN):490; Clearance:C3; B:46mm; Grease Limiting Speed (r/min):2400; SKU:22220eake4c3-nsk; Oil Limiting Speed (r/min):3200; Seals or Shields:Open Type; Cage Type:Steel; D:180mm; |
| CR99230 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; Clearance:C3; Cage Type:Steel; SKU:62201-2rs1/c3-skf; Weight:0.05 KGS; Limiting Speed Rating (r/min):15000; Fatigue Load Rating (kN):0.132; d:12mm; Availability:In Stock; Static Load Rating (kN):3.1; |
| TMDT 2-41 Non-ferrous Foundry Probe | B:15mm; Fatigue Load Rating (kN):0.51; Availability:In Stock; SKU:6205-ma-c3-fag; d:25mm; Reference Speed Rating (r/min):14400; Cage Type:Brass; Limiting Speed Rating (r/min):17000; Clearance:C3; Seals or Shields:Open Type; |
| 87569 / CR87569 Stainless Speedi Sleeve For Shaft Repair | D:340mm; B:114mm; Cage Type:Brass; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:C4; Availability:In Stock; SKU:22332-mb-c4-qbl; d:160mm; |
| CR99081 Stainless Steel Speedi Sleeve For Shaft Repair | Grease Speed Rating Open/Shielded n1:3400 rpm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:4000 rpm; Sealed Speed Rating n3:2200 rpm; Basic Static Radial Load Rating Co:80000 N; d:120.000 mm; Fillet Radius ra:2.00 mm; B:28.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:85200 N; |
| CP21326 Thrust Plate 13x25.5x2mm | d:40mm; SKU:3308a-2ztn9/c3vt113-; D:90mm; Cage Type:Plastic; Clearance:C3; Availability:In Stock; B:36.5mm; Seals or Shields:Two Metal Shields; Weight:0.02 KGS; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CR99275 Stainless Steel Speedi Sleeve For Shaft Repair Video