| No. | Brand | J | F | f | T | A | s | S | r |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| HK1015 | - | - | - | - | - | - | - | - | - |
| PWD00A-400-18 | Parker | - | - | - | - | - | - | - | - |
| 3026 | - | - | - | - | - | - | - | - | - |
| 6704ZZ | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 20pcs | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| 608ZZ | Rollway | - | - | - | - | - | - | - | - |
| EAZ 180 Induction Heater | Oil Limiting Speed (r/min):12000; Fatigue Load Rating (kN):3.05; D:150mm; Grease Limiting Speed (r/min):8000; Preload:Light; Cage Type:Plastic; B:24mm; Clearance:Standard; Static Load Rating (kN):80; d:100mm; |
| 99296 / CR99296 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):2800; Dynamic Load Rating (kN):97.5; Clearance:Standard; Static Load Rating (kN):202; Grease Limiting Speed (r/min):1800; B:31mm; d:50mm; SKU:51310-nsk; Weight:0.93 KGS; Availability:In Stock; |
| CP2744 Thrust Plate 27x43.7x0.8mm | Cage Type:Plastic; d:40mm; SKU:7008ctrsulp3-nsk; Oil Limiting Speed (r/min):32500; B:15mm; Dynamic Load Rating (kN):20.6; Static Load Rating (kN):15.9; Grease Limiting Speed (r/min):21300; Weight:0.02 KGS; D:68mm; |
| 150 mm x 225 mm x 35 mm AOH3184G (23184CK/W33, C3184KM, 23184CCK, 23184CAK Bearing Withdrawal Sleeve) | Reference Speed Rating (r/min):16000; D:80mm; B:21mm; Static Load Rating (kN):8.5; Dynamic Load Rating (kN):26.5; Fatigue Load Rating (kN):0.43; Availability:In Stock; Clearance:Standard; d:35mm; Limiting Speed Rating (r/min):11000; Size (mm):150 mm x 225 mm x 35 mm ; |
| FTRA6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x1mm | SKU:62/28-nsk; Availability:In Stock; d:28mm; Clearance:Standard; Grease Limiting Speed (r/min):12000; Dynamic Load Rating (kN):16.6; Static Load Rating (kN):9.5; D:58mm; Oil Limiting Speed (r/min):14000; B:16mm; |
| H3152X Adapter Sleeve Supplier | Oil Speed Rating n2:3600 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:176000 N; D:150.0000 mm; B:49.20 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:142000 N; Sealed Speed Rating n3:2600 rpm; |
| AOH30/530 (230/530CAK/W33, C30/530K, 230/530CAK, 230/530CCK Bearing Withdrawal Sleeve) | Grease Limiting Speed (r/min):380; D:650mm; Cage Type:Brass; Seals or Shields:Open Type; Static Load Rating (kN):8550; Availability:In Stock; Dynamic Load Rating (kN):4800; Clearance:Standard; B:232mm; d:360mm; |
| TRA4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x0.8mm | Calculation factor Y0:0.58; Calculation factor A:17.7; h:15.5 mm; Limiting speed:1400 r/min; D:650 mm; Basic static load rating C0:2500 kN; a:382 mm; Calculation factor Y1:0.66; D1 ≈:577 mm; Fatigue load limit Pu:45.5 kN; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
CR99262 Stainless Steel Speedi Sleeve For Shaft Repair Video