| CR99226 Stainless Steel Speedi Sleeve For Shaft Repair | SKU:22226e/c4-skf; Fatigue Load Rating (kN):88; Availability:In Stock; Dynamic Load Rating (kN):735; Clearance:C4; Weight:0.02 KGS; Reference Speed Rating (r/min):2600; d:130mm; Seals or Shields:Open Type; B:64mm; |
| AOHX30/560 (230/560CAK/W33, C30/560KM, 230/560CAK, 230/560CCK Bearing Withdrawal Sleeve) | Da max.:50.4 mm; Reference grease quantity Gref:1.7 cm³; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:17; Static axial stiffness, preload class A:79 N/µm; Preload class A GA:80 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; rb max.:0.6 mm; da min.:34.6 mm; |
| 86145 / CR86145 Stainless Speedi Sleeve For Shaft Repair | B:20.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:13300 N; Basic Static Radial Load Rating Co:7800 N; Grease Speed Rating n1:18000 rpm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:22000 rpm; D:32.0000 mm; Fillet Radius ra:0.64 mm; |
| TRB2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x1.6mm | Db2:71 mm; J:70 mm; A1:12 mm; B1:33 mm; T:40 mm; Basic static load rating C0:7.8 kN; Fatigue load limit Pu:0.335 kN; Basic dynamic load rating C:14 kN; N4:4 mm; J6:83 mm; |
| AS3552 Thrust Needle Roller Bearing Washer 35x52x1mm | Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:50700 N; d:30.000 mm; Oil Speed Rating n2:25000 rpm; Basic Static Radial Load Rating Co:40000 N; D:72.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:17000 rpm; B:38.00 mm; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| TMAS 50/KIT Machinery Shim Kit | Weight:2.15 KGS; Grease Limiting Speed (r/min):6700; B:28mm; Oil Limiting Speed (r/min):10000; Preload:Light; Seals or Shields:Open Type; d:120mm; Dynamic Load Rating (kN):111; Fatigue Load Rating (kN):4; Availability:In Stock; |
| CR99812 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor f2D:1.08; Static axial stiffness, preload class B:219 N/µm; Static axial stiffness, preload class D:393 N/µm; Number of balls z:19; d1:70.8 mm; Preload class C GC:960 N; d:60 mm; a:27.2 mm; rb max.:0.6 mm; r3,4 min.:0.6 mm; |