| No. | Brand | J | F | f | T | A | s | S | r |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| r155.88 | - | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| 4900 | SKF | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6210 | FAFNIR | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| 35x80x31 | INA | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| T6DCM | - | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| 90766 / CR90766 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:lj3/4-zz-r&m; D:1.875 inch; Clearance:Standard; Availability:In Stock; d:0.75 inch; B:0.563 inch; |
| FTRB3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x1.5mm | Fw:3 mm; Reference speed:38000 r/min; Ew:6 mm; Mass needle roller and cage assembly:0.0004 kg; U:7 mm; Fatigue load limit Pu:0.104 kN; Basic dynamic load rating C:1.42 kN; Limiting speed:43000 r/min; Basic static load rating C0:1.02 kN; |
| AH3132G Withdrawal Sleeve(matched Bearing:23132CCK/W33, 22232CCK/W33, C3132K) | Weight:0.20 KGS; B:6mm; Availability:In Stock; Cage Type:Steel; D:17mm; SKU:s689-2zw6-zen; Seals or Shields:Two Metal Shields; Clearance:Standard; d:9mm; |
| CR99865 Stainless Steel Speedi Sleeve For Shaft Repair | Fatigue load limit Pu:153 kN; K:4 mm; d:200 mm; das:221 mm; r1,2 min.:2.1 mm; ra max.:2 mm; Reference speed:1000 r/min; Mass bearing:15.8 kg; D:280 mm; B:80 mm; |
| AH3134, AH3134G Withdrawal Sleeve(matched Bearing:23134CCK, 22234CCK/W33, C3134K, C2234K) | Oil Speed Rating Open/Shielded n2:9000 rpm; Basic Static Radial Load Rating Co:16600 N; Grease Speed Rating Open/Shielded n1:7400 rpm; Fillet Radius ra:1.00 mm; d:50.000 mm; D:90.0000 mm; B:11.00 mm; Basic Dynamic Radial Load Rating C:19900 N; |
| CR99828 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bearing:67 kg; Basic dynamic load rating C:1340 kN; T:80.963 mm; Calculation factor e:0.37; Da max.:660 mm; D:692.15 mm; r1,2 min.:6.4 mm; C:61.913 mm; Ca min.:13 mm; Da min.:646 mm; |
| 90198 / CR90198 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):3600; Cage Type:Steel; Weight:5.20 KGS; Dynamic Load Rating (kN):289; SKU:21317eae4-nsk; Seals or Shields:Open Type; B:41mm; d:85mm; |
| 86111 / CR86111 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:4.45 KGS; Clearance:C3; D:200mm; Cage Type:Steel; d:110mm; Dynamic Load Rating (kN):144; Availability:In Stock; Static Load Rating (kN):117; B:38mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
CR99253 Stainless Steel Speedi Sleeve For Shaft Repair Video