| No. | Brand | J | F | f | T | A | s | S | r |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| 10W/12W | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 12229-16G00-0B0 | - | - | - | - | - | - | - | - | - |
| 480W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| NUP311 | NSK | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| (Zhv1) | - | - | - | - | - | - | - | - | - |
| 1-10pcs | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| A4vg40ep4d1 | - | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 0821200230 | Rexroth | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| NUP236E.M1.C2 | fag | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | - | - | - | - | - | - | - |
| 60062RSC3GSR | koyo | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 20 | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| CR99112 Stainless Steel Speedi Sleeve For Shaft Repair | α:15 °; B:28 mm; r1 min.:0.3 mm; Basic static load rating C0:58.5 kN; C1 max.:21 mm; l1 min.:48 mm; h:84 mm; dk:38.1 mm; l7 min.:27 mm; G:M 22x1.5; |
| CPR860110 Thrust Plate 60x110x8mm | D:115mm; d:50mm; Clearance:Standard; SKU:mmf550bs115ppdm-timk; Speed Rating (r/min):1670; B:34mm; Availability:In Stock; Cage Type:Plastic; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):85.9; |
| VHIN 800 Bearing Induction Heater | Seals or Shields:Open Type; Dynamic Load Rating (kN):2380; Availability:In Stock; Reference Speed Rating (r/min):930; Limiting Speed Rating (r/min):820; Cage Type:Steel; Static Load Rating (kN):3840; B:140mm; SKU:24052ejw33-timken; d:260mm; |
| TRA1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x0.8mm | D:85mm; Static Load Rating (kN):20.3; SKU:6209z-timken; Availability:In Stock; Limiting Speed Rating (r/min):8200; Reference Speed Rating (r/min):12000; Clearance:Standard; B:19mm; Dynamic Load Rating (kN):31.2; Cage Type:Steel; |
| GEFZ9S Inch Spherical Plain Bearing 9.53x20.64x10.31mm | d:170 mm; Hydraulic nut:HMV 34 E; B1:101 mm; d3:220 mm; G:M 170x3; B:33 mm; Lock nut:KMFE 34; d1:152.4 mm; Mass adapter sleeve assembly:5.5 kg; |
| CPR81212 Thrust Plate 60x95x7.5mm | SKU:6005tbr12p4-rhp; Seals or Shields:Open Type; Clearance:Standard; Cage Type:Plastic; Availability:In Stock; Static Load Rating (kN):5.85; D:47mm; Weight:0.20 KGS; d:25mm; Dynamic Load Rating (kN):10.1; |
| CR99836 Stainless Steel Speedi Sleeve For Shaft Repair | B:60mm; d:160mm; Cage Type:Steel; Fatigue Load Rating (kN):83; Availability:In Stock; Limiting Speed Rating (r/min):3000; Static Load Rating (kN):800; Seals or Shields:Open Type; SKU:23032cc/c3w33-skf; Weight:0.02 KGS; |
| 86546 / CR86546 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; SKU:xls3.1/2-hoffmann; Seals or Shields:Open Type; B:0.75 Inch; Weight:0.20 KGS; Availability:In Stock; D:5 Inch; d:3.5 Inch; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99248 Stainless Steel Speedi Sleeve For Shaft Repair Video