| No. | Brand | J | F | f | T | A | s | S | r |
| 6212RCE | NSK | - | - | - | - | - | - | - | - |
| 22310-E1-T41A | fag | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| Rasey1-N-HLC | INA | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 412 | NSK | 96 mm | - | - | - | 32 mm | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| P315/P330 | Parker | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 40PCS | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| VCL6P65A | Parker | - | - | - | - | - | - | - | - |
| 35X12.50R20LT | - | - | - | - | - | - | - | - | - |
| GS905 | - | - | - | - | - | - | - | - | - |
| 3/8-16 | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| NU2222 | NSK | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| 21N | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| 86575 / CR86575 Stainless Speedi Sleeve For Shaft Repair | Accessories:Snap-Ring; Fillet Radius ra:2.00 mm; d:70.000 mm; Basic Dynamic Radial Load Rating C:114000 N; Grease Speed Rating Open/Shielded n1:3700 rpm; Basic Static Radial Load Rating Co:102000 N; B:35.00 mm; D:150.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; |
| AHX3026 Withdrawal Sleeve(matched Bearing:23026CCK/W33, C3026K) | Seals or Shields:Open Type; Cage Type:Plastic; Availability:In Stock; Static Load Rating (kN):28; d:80mm; Preload:Light; Weight:0.85 KGS; Oil Limiting Speed (r/min):24000; Fatigue Load Rating (kN):1.18; B:22mm; |
| AHX3228G Withdrawal Sleeve(matched Bearing:23228CCK/W33) | d:35 mm; l5 ≈:25 mm; G:M 36x3; dk:47 mm; l4 max.:174 mm; Mass rod end:1.4 kg; α:6 °; h1:130 mm; Basic static load rating C0:134 kN; Material constant KM:330; |
| HMV34E / HMV 34E Hydraulic Nut (M170x3)x244x48mm | SKU:22220ejw33c2-timken; Limiting Speed Rating (r/min):3100; B:46mm; Clearance:C2; Availability:In Stock; Reference Speed Rating (r/min):3800; Dynamic Load Rating (kN):435; D:180mm; Seals or Shields:Open Type; Weight:5.00 KGS; |
| FTRC1226 Thrust Bearing Ring / Thrust Needle Bearing Washer 12x26x2mm | Oil Limiting Speed (r/min):3300; Static Load Rating (kN):270; Dynamic Load Rating (kN):168; D:140mm; Grease Limiting Speed (r/min):2500; Seals or Shields:Open Type; Cage Type:Steel; Clearance:Standard; d:90mm; Availability:In Stock; |
| HMV200E / HMV 200E Hydraulic Nut 1002x1180x105mm | G:Tr 500x5; B2:376 mm; Mass withdrawal sleeve:73.5 kg; d1:460 mm; d:480 mm; B1:364 mm; Nut for removal:HM 31/500; G2:G 1/4; G1:52 mm; A:9 mm; |
| CR99860 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):87.9; Dynamic Load Rating (kN):64.9; D:130mm; B:25mm; d:75mm; SKU:2mm215wicrdum-timken; Clearance:Standard; Cage Type:Plastic; Speed Rating (r/min):10800; Seals or Shields:Open Type; |
| ZM130 Precision Locknut (M130x2)x165x24mm | SKU:22213kemw33-timken; d:65mm; Static Load Rating (kN):204; Dynamic Load Rating (kN):198; Availability:In Stock; Weight:1.60 KGS; B:31mm; Clearance:Standard; D:120mm; Cage Type:Brass; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99861 Stainless Steel Speedi Sleeve For Shaft Repair Video