| No. | Brand | J | F | f | T | A | s | S | r |
| 17" | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| PC200-5 | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 23996YMB | INA | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 6.5kg | - | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 35BG05S16G-2DL | Nachi | - | - | - | - | - | - | - | - |
| (LCC-1007) | - | - | - | - | - | - | - | - | - |
| 400S-M13 | Parker | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 24VDC | - | - | - | - | - | - | - | - | - |
| 70x100x16 | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| D3W1CNYC | Parker | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 600x400 | - | - | - | - | - | - | - | - | - |
| 305183 | - | - | - | - | - | - | - | - | - |
| 90777 / CR90777 Stainless Speedi Sleeve For Shaft Repair | Reference speed:170 r/min; H:150 mm; D:750 mm; da min.:741 mm; r1,2 min.:5 mm; Minimum axial load factor A:32; Basic static load rating C0:20000 kN; Basic dynamic load rating C:3800 kN; Fatigue load limit Pu:1270 kN; D1:565 mm; |
| 99354 / CR99354 Stainless Speedi Sleeve For Shaft Repair | B:4mm; SKU:mr105-2z-zen; Clearance:Standard; d:5mm; Cage Type:Steel; Seals or Shields:Two Metal Shields; Weight:0.20 KGS; D:10mm; Availability:In Stock; |
| CR99091 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Speed Rating (r/min):7500; d:100mm; Weight:1.30 KGS; B:24mm; SKU:3mm9120wicrsum-timke; Static Load Rating (kN):79.2; Availability:In Stock; D:150mm; Cage Type:Plastic; |
| EAZ 222-2 Induction Heater | Limiting Speed Rating (r/min):780; Static Load Rating (kN):3140; Weight:45.00 KGS; Reference Speed Rating (r/min):920; B:90mm; D:480mm; Availability:In Stock; Cage Type:Brass; Dynamic Load Rating (kN):1710; Clearance:Standard; |
| FTRB3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x1.5mm | Fw:3 mm; Reference speed:38000 r/min; Ew:6 mm; Mass needle roller and cage assembly:0.0004 kg; U:7 mm; Fatigue load limit Pu:0.104 kN; Basic dynamic load rating C:1.42 kN; Limiting speed:43000 r/min; Basic static load rating C0:1.02 kN; |
| CP21326 Thrust Plate 13x25.5x2mm | d:40mm; SKU:3308a-2ztn9/c3vt113-; D:90mm; Cage Type:Plastic; Clearance:C3; Availability:In Stock; B:36.5mm; Seals or Shields:Two Metal Shields; Weight:0.02 KGS; |
| FTRC1024 Thrust Bearing Ring / Thrust Needle Bearing Washer 10x24x2mm | B:18mm; SKU:22205e/c3-qbl; Availability:In Stock; Weight:0.02 KGS; D:52mm; d:25mm; Clearance:C3; Cage Type:Steel; Seals or Shields:Open Type; |
| TMAS 510 Machinery Shim Kit | Da:269.999 mm; H:317.5 mm; RG:3/8 NPT; End plug (suffix Y):EPR 16; Cap bolt recommended tightening torque:359.3 N·m; H2:63.5 mm; Initial grease fill:623.7 g; Cap bolt:4 x 3/4-10 UNC; P90°:138 kN; h:50.8 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99189 Stainless Steel Speedi Sleeve For Shaft Repair Video