| No. | Brand | J | F | f | T | A | s | S | r |
| 6mm | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6003 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| NJ2309 | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| 1.2 | - | - | - | - | - | - | - | - | - |
| Dh220 | - | - | - | - | - | - | - | 4.763 mm | - |
| GU10 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| AOH32/800 (232/800CAK/W33, 232/800CAK, 232/800CCK Bearing Withdrawal Sleeve) | Weight:0.02 KGS; D:250mm; Preload:Light; Seals or Shields:Open Type; SKU:7936a5trsulp3-nsk; Static Load Rating (kN):174; Clearance:Standard; B:33mm; d:180mm; Grease Limiting Speed (r/min):4700; |
| AOHX240/600 (240/600CAK, 240/600CCK, 240/600ECAK/W33, 240/600ECAK30/W33 Bearing Withdrawal Sleeve) | Preload:Medium; B:9mm; SKU:7002acdgb/p4a-skf; Clearance:Standard; Grease Limiting Speed (r/min):50000; Cage Type:Plastic; Seals or Shields:Open Type; d:15mm; Static Load Rating (kN):2.32; D:32mm; |
| HMV62E / HMV 62E Hydraulic Nut 312x416x62mm | D:280mm; Weight:11.00 KGS; Static Load Rating (kN):1130; Clearance:C3; Dynamic Load Rating (kN):712; B:60mm; Limiting Speed Rating (r/min):1600; Cage Type:Brass; Availability:In Stock; Reference Speed Rating (r/min):1900; |
| AOH3084G(23084CAK/W33, C3084KM, 23084CAK, 23084CCK Bearing Withdrawal Sleeve | Basic static load rating C0:360 kN; Specific dynamic load factor K:100 N/mm²; α:6 °; G:M 60x4; l7 min.:73 mm; h:225 mm; d2 max.:137 mm; d:60 mm; Mass rod end:6.25 kg; l1 min.:120 mm; |
| AH24126 Withdrawal Sleeve(matched Bearing:24126CCK/W33, C4126K30) | d:30mm; Availability:In Stock; Weight:0.11 KGS; Static Load Rating (kN):16.8; Speed Rating (r/min):25500; SKU:2mm9106wicrsuh-timke; Clearance:Standard; Dynamic Load Rating (kN):10.3; Cage Type:Plastic; B:13mm; |
| CP5070 Thrust Plate 50x69.4x0.8mm | D:62mm; Weight:0.02 KGS; SKU:1206j-qbl; Seals or Shields:Open Type; Clearance:Standard; B:16mm; Availability:In Stock; d:30mm; Cage Type:Steel; |
| AH3120 Withdrawal Sleeve 95x100x64mm | Clearance:Standard; SKU:np326808/np806712-ti; B:22.5mm; d:27mm; Cage Type:Steel; Weight:0.17 KGS; D:62mm; Seals or Shields:Open Type; Availability:In Stock; |
| TKES 10A Endoscope | d:85.000 mm; Basic Static Radial Load Rating Co:19600 N; Grease Speed Rating Open/Shielded n1:5300 rpm; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:19500 N; B:13.00 mm; Accessories:One Seal; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CR99181 Stainless Steel Speedi Sleeve For Shaft Repair Video