| No. | Brand | J | F | f | T | A | s | S | r |
| 12 | - | - | - | - | - | - | - | - | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| 8x8 | - | - | - | - | - | - | - | - | - |
| EX85 | - | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| 4WE10C3X/CW230N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| XM1 | TOKIMEC | - | - | - | - | - | - | - | - |
| 5421 | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| 23948 | SKF | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | - | - | - | - | - | - | - |
| N20.5% | - | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| TRA2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x0.8mm | Static Load Rating (kN):34.5; Preload:Light; SKU:7013ctrdudlp3-nsk; d:65mm; Oil Limiting Speed (r/min):21300; Availability:In Stock; Clearance:Standard; Seals or Shields:Open Type; Grease Limiting Speed (r/min):14000; D:100mm; |
| 90785 / CR90785 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; Weight:0.02 KGS; Seals or Shields:Open Type; Cage Type:Steel; D:47mm; Availability:In Stock; B:12mm; d:25mm; SKU:6005/c3-qbl; |
| 87529 / CR87529 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:14mm; d:35mm; Static Load Rating (kN):13; Availability:In Stock; Oil Limiting Speed (r/min):31000; Preload:Medium; Clearance:Standard; D:62mm; SKU:7007ctrqulp3-nsk; |
| AH220 Withdrawal Sleeve 95x100x45mm | Clearance:Standard; Cage Type:Steel; Weight:1.15 KGS; Oil Limiting Speed (r/min):3800; d:150mm; Availability:In Stock; Static Load Rating (kN):58.5; Seals or Shields:Non-Contact Seal; B:20mm; D:190mm; |
| HMV46E / HMV 46E Hydraulic Nut 232x318x53mm | B:12.5 mm; Mass inner ring:0.0052 kg; F:13 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
| TRD6074 Thrust Bearing Ring / Thrust Needle Bearing Washer 95.25x117.475x3.2mm | Speed Rating (r/min):8800; Availability:In Stock; d:95mm; B:18mm; Weight:0.60 KGS; Dynamic Load Rating (kN):44.2; D:130mm; Seals or Shields:Open Type; SKU:3mm9319wicrsul-timke; Cage Type:Plastic; |
| FTRC1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x2mm | Clearance:Standard; Availability:In Stock; Preload:Medium; Grease Limiting Speed (r/min):63000; Cage Type:Plastic; Oil Limiting Speed (r/min):95000; Fatigue Load Rating (kN):0.048; D:21mm; Static Load Rating (kN):1.12; B:5mm; |
| 240 mm x 400 mm x 160 mm 90799 / CR90799 Stainless Speedi Sleeve For Shaft Repair | SKU:6302-koyo; Static Load Rating (kN):5.45; Dynamic Load Rating (kN):11.4; D:42mm; Clearance:Standard; B:13mm; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; Cage Type:Steel; Size (mm):240 mm x 400 mm x 160 mm ; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CR99830 Stainless Steel Speedi Sleeve For Shaft Repair Video