| No. | Brand | J | F | f | T | A | s | S | r |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 150kg | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| BFR3000 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| R450-7 | - | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| 23948 | SKF | - | - | - | - | - | - | - | - |
| 6213-MA-P6-C3 | fag | - | - | - | - | - | - | - | - |
| 22217-EKC3W33 | SKF | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 99.7%Min | - | - | - | - | - | - | - | - | - |
| 2006 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 74 mm | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 25%-40% | - | - | - | - | - | - | - | - | - |
| 3/8-16 | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| CR99262 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.18 KGS; Seals or Shields:Open Type; Cage Type:Steel; Availability:In Stock; d:50mm; B:10mm; Clearance:Standard; Reference Speed Rating (r/min):9100; Dynamic Load Rating (kN):16.1; Limiting Speed Rating (r/min):6300; |
| AHX330 Withdrawal Sleeve 145x155x83mm | Oil Limiting Speed (r/min):75500; d:10mm; SKU:7000acydu/glp4-nachi; Static Load Rating (kN):2.41; Cage Type:Plastic; D:26mm; Weight:0.02 KGS; Dynamic Load Rating (kN):5.15; Preload:Light; B:8mm; |
| TRB3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x1.6mm | Cage Type:Plastic; Availability:In Stock; Clearance:Standard; B:15mm; Speed Rating (r/min):2900; D:72mm; d:35mm; Dynamic Load Rating (kN):45.4; Weight:0.29 KGS; Seals or Shields:Open Type; |
| FTRB100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1.5mm | Oil Speed Rating n2:8000 rpm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:33800 N; d:40.000 mm; B:23.00 mm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating n1:6700 rpm; |
| CP2744 Thrust Plate 27x43.7x0.8mm | Cage Type:Plastic; d:40mm; SKU:7008ctrsulp3-nsk; Oil Limiting Speed (r/min):32500; B:15mm; Dynamic Load Rating (kN):20.6; Static Load Rating (kN):15.9; Grease Limiting Speed (r/min):21300; Weight:0.02 KGS; D:68mm; |
| MSR50x1.5 Precision Locknut / MSR-M50x1.5 Locking Nut (M50x1.5)x70x25mm | Static Load Rating (kN):38; Clearance:Standard; SKU:1317j-nsk; Grease Limiting Speed (r/min):3400; Dynamic Load Rating (kN):98.5; Weight:0.02 KGS; D:180mm; B:41mm; d:85mm; Availability:In Stock; |
| HMV94E / HMV 94E Hydraulic Nut 472x602x77mm | G:Tr 750x7; A:15 mm; Hydraulic nut:HMV 150 E; G1:65 mm; B1:515 mm; d1:670 mm; d:710 mm; B2:531 mm; Mass withdrawal sleeve:278 kg; G2:G 1/4; |
| VHIS 75 Bearing Induction Heater | Availability:In Stock; d:120mm; Cage Type:Steel; Clearance:Standard; B:80mm; Reference Speed Rating (r/min):1700; Limiting Speed Rating (r/min):1600; Static Load Rating (kN):1080; SKU:24124kejw33-timken; D:200mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CR99827 Stainless Steel Speedi Sleeve For Shaft Repair Video