| No. | Brand | J | F | f | T | A | s | S | r |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| 51330F | SKF | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| NP300 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 1500 | fag | - | - | - | - | - | - | - | - |
| DH650 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 12feet | - | - | - | - | - | - | - | - | - |
| 38, | Parker | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| OMR125 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| MI17412 | - | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| 6207-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| 99745 / CR99745 Stainless Speedi Sleeve For Shaft Repair | B:31mm; SKU:2215ektn9-qbl; Cage Type:Plastic; Availability:In Stock; d:75mm; Clearance:Standard; Seals or Shields:Open Type; D:130mm; Weight:0.02 KGS; |
| 20 mm x 47 mm x 14 mm AHX3226G Withdrawal Sleeve(matched Bearing:23226CCK/W33) | Fillet Radius ra:1.50 mm; D:145.0000 mm; B:24.00 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; Basic Dynamic Radial Load Rating C:63700 N; Oil Speed Rating Open/Shielded n2:5300 rpm; d:95.000 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:54000 N; Sealed Speed Rating n3:2800 rpm; Size (mm):20 mm x 47 mm x 14 mm ; |
| TRA613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x0.8mm | d:190mm; SKU:23038camke4c3-nsk; Dynamic Load Rating (kN):775; Availability:In Stock; Static Load Rating (kN):1350; Oil Limiting Speed (r/min):1400; D:290mm; Seals or Shields:Open Type; Weight:17.60 KGS; Clearance:C3; |
| 86688 / CR86688 Stainless Speedi Sleeve For Shaft Repair | Roller and cage thrust assembly:K 89428 M; Basic dynamic load rating C:1100 kN; Reference speed:530 r/min; Ea:155 mm; Shaft washer:WS 89428; Mass roller and cage thrust assembly:8.54 kg; Fatigue load limit Pu:425 kN; Eb:273 mm; Limiting speed:1100 r/min; Dw:28 mm; |
| AH30/710 Withdrawal Sleeve 670x710x286mm | Clearance:Standard; Grease Limiting Speed (r/min):2400; Dynamic Load Rating (kN):229000; d:80mm; Weight:6.93 KGS; Static Load Rating (kN):224000; Cage Type:Brass; Oil Limiting Speed (r/min):3300; Seals or Shields:Open Type; B:68.3mm; |
| 99575 / CR 99575 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; D:400mm; Cage Type:Brass; Limiting Speed Rating (r/min):1100; Weight:47.60 KGS; B:104mm; SKU:23052kembw33c3-timke; Static Load Rating (kN):2740; Dynamic Load Rating (kN):1820; Reference Speed Rating (r/min):1300; |
| 99306 / CR99306 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:4300 rpm; B:13.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:16000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; d:65.000 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:17400 N; |
| CPR84585 Thrust Plate 45x85x8mm | Fatigue Load Rating (kN):0.08; Preload:Medium; B:7mm; D:28mm; Seals or Shields:Open Type; Cage Type:Plastic; d:15mm; Static Load Rating (kN):1.9; Grease Limiting Speed (r/min):56000; Availability:In Stock; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CR99180 Stainless Steel Speedi Sleeve For Shaft Repair Video