| No. | Brand | J | F | f | T | A | s | S | r |
| 2303-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| N20.5% | - | - | - | - | - | - | - | - | - |
| 3659 | Timken | - | - | - | - | - | - | - | - |
| ALL72281 | Timken | - | - | - | - | - | - | - | - |
| (10)MR95ZZ | - | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| 3026 | - | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| 40BCV09S1-2NSL | Nachi | - | - | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| 96LED | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| CR32 | FAFNIR | - | - | - | - | - | - | - | - |
| R450-7 | - | - | - | - | - | - | - | - | - |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| GS2068 | - | - | - | - | - | - | - | - | - |
| (DSM-14T) | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | 92 mm | - | - | - | 35 mm | - | - | - |
| VCL6P65A | Parker | - | - | - | - | - | - | - | - |
| ISO9001 | INA | - | - | - | - | - | - | - | - |
| (CC24SC, | INA | - | - | - | - | - | - | - | - |
| 1W | - | - | - | - | - | - | - | - | - |
| 85907 / CR85907 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):28000; B:19mm; Grease Limiting Speed (r/min):17000; Seals or Shields:Open Type; D:85mm; Weight:0.41 KGS; d:45mm; Clearance:Standard; Dynamic Load Rating (kN):42.3; Preload:Medium; |
| 87850 / CR87850 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Preload:Light; Seals or Shields:Open Type; Dynamic Load Rating (kN):203; Cage Type:Plastic; Clearance:Standard; Weight:6.35 KGS; Grease Limiting Speed (r/min):5600; d:130mm; Oil Limiting Speed (r/min):8500; |
| AOH32/850 (232/850CAK/W33,232/850CAK, 232/850CCK, 232/850CCK/W33 Bearing Withdrawal Sleeve) | J1:127 mm; P180°:222 kN; da:184.15 mm; Pa:58.7 kN; P60°:557 kN; Taconite seal:TER 160; Adapter sleeve assembly:SNW 40x7.1/4; Cap bolt:1 1/4-7 UNC; S:4.763 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| FTRC7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x2mm | R1:65.088 mm; PG:1/8 NPT; H:222.25 mm; Initial grease fill:181.44 g; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:515.2 N·m; Housing:FSAF 617; Labyrinth ring:2 x LOR 182; R2:30.163 mm; A2:173.037 mm; |
| CP47095 Thrust Plate 70x94.3x4mm | Reference Speed Rating (r/min):4500; Availability:In Stock; Fatigue Load Rating (kN):3; D:270mm; Seals or Shields:Open Type; d:220mm; Static Load Rating (kN):110; Dynamic Load Rating (kN):78; B:24mm; SKU:61844/c3-skf; |
| TRC916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x2.4mm | Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:80900 N; Oil Speed Rating n2:6000 rpm; d:45.000 mm; D:100.0000 mm; Fillet Radius ra:1.50 mm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:80000 N; Sealed Speed Rating n3:4500 rpm; B:42.90 mm; |
| CR99233 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; Static Load Rating (kN):7.8; Cage Type:Steel; d:25mm; Dynamic Load Rating (kN):15; Limiting Speed Rating (r/min):18400; Weight:0.02 KGS; Clearance:C3; SKU:6205-2z-c3-fag; Fatigue Load Rating (kN):0.485; |
| TKES 10F Endoscope | D:58mm; Seals or Shields:Two Rubber Seals; SKU:6809dd-nsk; d:45mm; Grease Limiting Speed (r/min):11000; Availability:In Stock; Oil Limiting Speed (r/min):13000; Dynamic Load Rating (kN):6.6; B:7mm; Cage Type:Steel; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
CR99825 Stainless Steel Speedi Sleeve For Shaft Repair Video