| No. | Brand | J | F | f | T | A | s | S | r |
| 100% | - | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| (CF-05) | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 20W/30W/50W | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 350 | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 62207-2RS | SKF | - | - | - | - | - | - | - | - |
| [10Pc] | - | - | - | - | - | - | - | - | - |
| F636ZZ | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| 50T-26-F-R | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| MI17412 | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 6304-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 85179 / CR85179 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; B:0.563 inch; d:0.75 inch; Clearance:Standard; D:1.875 inch; Seals or Shields:Two Rubber Seals; Availability:In Stock; SKU:lj3/4-2rs-r&m; |
| 99721 / CR99721 Stainless Speedi Sleeve For Shaft Repair | B:53mm; Cage Type:Brass; Seals or Shields:Open Type; SKU:23028-e1a-k-m-c3-qbl; Weight:0.02 KGS; Availability:In Stock; d:140mm; Clearance:C3; D:210mm; |
| AH24024 Withdrawal Sleeve(matched Bearing:24024CCK, C4024K) | Reference Speed Rating (r/min):--; D:26mm; Static Load Rating (kN):1.97; SKU:6000vvc3-nsk; Fatigue Load Rating (kN):--; Clearance:C3; Weight:0.02 KGS; Availability:In Stock; B:8mm; d:10mm; |
| ZM70 Precision Locknut (M70x2)x92x18mm | Sealed Speed Rating n3:14000 rpm; D:37.0000 mm; Accessories:No Shield, no Seal; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; Oil Speed Rating n2:18000 rpm; Basic Dynamic Radial Load Rating C:11700 N; Basic Static Radial Load Rating Co:6800 N; d:12.000 mm; B:19.1 mm; |
| ZM35 Precision Locknut (M35x1.5)x52x12mm | Grease Limiting Speed (r/min):6000; SKU:22208eae4-nsk; d:40mm; Availability:In Stock; B:23mm; Cage Type:Steel; Oil Limiting Speed (r/min):7500; D:80mm; Dynamic Load Rating (kN):90.5; Weight:0.50 KGS; |
| 87529 / CR87529 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:14mm; d:35mm; Static Load Rating (kN):13; Availability:In Stock; Oil Limiting Speed (r/min):31000; Preload:Medium; Clearance:Standard; D:62mm; SKU:7007ctrqulp3-nsk; |
| 99595 / CR 99595 Stainless Speedi Sleeve For Shaft Repair | SKU:1310ektn9-qbl; Weight:0.02 KGS; Cage Type:Plastic; Clearance:Standard; Availability:In Stock; B:27mm; Seals or Shields:Open Type; D:110mm; d:50mm; |
| TRA3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x0.8mm | Clearance:C3; Static Load Rating (kN):1.95; D:26mm; B:8mm; SKU:629-c-2hrs-c3-fag; Dynamic Load Rating (kN):4.85; Limiting Speed Rating (r/min):19000; Fatigue Load Rating (kN):0.099; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
CR99155 Stainless Steel Speedi Sleeve For Shaft Repair Video