| No. | Brand | J | F | f | T | A | s | S | r |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3307 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| J05E | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 16-0-1 | - | - | - | - | - | - | - | - | - |
| 7001140808 | INA | - | - | - | - | - | - | - | - |
| F6800ZZ | - | - | - | - | - | - | - | - | - |
| 3d | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| NU2219-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| 16X8 | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| AHX2314G Withdrawal Sleeve(matched Bearing:22314EK, C2314K) | Availability:In Stock; Cage Type:Steel; Dynamic Load Rating (kN):90; Fatigue Load Rating (kN):2.75; d:50mm; SKU:3310a-2rs1/c3mt33-sk; B:44.4mm; Static Load Rating (kN):64; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):4300; |
| BIC1015 Inner Ring 15x20.8x15mm | B:20 mm; Mass rod end:0.53 kg; Basic dynamic load rating C:48 kN; dk:35.5 mm; l1 min.:53 mm; r1 min.:0.6 mm; l2 max.:128 mm; Basic static load rating C0:78 kN; α:7 °; G:M 24x2; |
| H312 Adapter Sleeve 55x80x47mm | Availability:In Stock; d:280mm; Cage Type:Brass; Clearance:Standard; D:460mm; Dynamic Load Rating (kN):2780; Seals or Shields:Open Type; SKU:23156embw507c08-timk; Limiting Speed Rating (r/min):770; Weight:96.80 KGS; |
| CR99146 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):53; Cage Type:Steel; SKU:6216zc3-nsk; Clearance:C3; Availability:In Stock; Seals or Shields:Single Metal Shield; Grease Limiting Speed (r/min):4500; d:80mm; Dynamic Load Rating (kN):72.5; B:26mm; |
| FTRA5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x1mm | Dynamic Load Rating (kN):51200; Availability:In Stock; Weight:0.82 KGS; D:80mm; Clearance:C3; Grease Limiting Speed (r/min):5100; B:34.9mm; d:35mm; Static Load Rating (kN):33200; Oil Limiting Speed (r/min):6500; |
| 99400 / CR99400 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; d:30mm; SKU:6306-zz/c3-qbl; Cage Type:Steel; B:19mm; Weight:0.02 KGS; Seals or Shields:Two Metal Shields; Clearance:C3; D:72mm; |
| TRA3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x0.8mm | Adapter sleeve assembly:SNW 22x3.7/8; H:239.316 mm; H1:125.425 mm; A1:120.65 mm; Housing:SAF 522; Initial grease fill:232.47 g; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; H2:50.8 mm; Appropriate attachment bolt size G:0.75 in; |
| H307X Adapter Sleeve 30x52x35mm | das:802 mm; Calculation factor kr:0.1; Reference speed:240 r/min; Calculation factor e:0.2; Fatigue load limit Pu:315 kN; E:880 mm; Mass bearing:105 kg; ra max.:4 mm; Da max.:902 mm; da min.:768 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CR99144 Stainless Steel Speedi Sleeve For Shaft Repair Video