| No. | Brand | J | F | f | T | A | s | S | r |
| WE6Y5/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| S44 | RBC | - | - | - | - | - | - | 4.763 mm | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| BFR3000 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| F-53125.02.NUKR | INA | - | - | - | - | - | - | - | - |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| Q235 | INA | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| BRG453 | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| TRB2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x1.6mm | da:74.612 mm; L:387.35 mm; A1:111.125 mm; Cap bolt, SAE grade:8; Cap bolt:2 x 3/4-10 UNC; J min.:295.275 mm; h:47.625 mm; P90°:56.5 kN; Mass pillow block:31.4 kg; H2:44.45 mm; |
| TMAS 360 Machinery Shim Kit | Fatigue Load Rating (kN):0.75; SKU:6403-c3-fag; Cage Type:Steel; Limiting Speed Rating (r/min):28000; d:17mm; Reference Speed Rating (r/min):13700; Seals or Shields:Open Type; Availability:In Stock; B:17mm; Clearance:C3; |
| EAZ 180 Induction Heater | Oil Limiting Speed (r/min):12000; Fatigue Load Rating (kN):3.05; D:150mm; Grease Limiting Speed (r/min):8000; Preload:Light; Cage Type:Plastic; B:24mm; Clearance:Standard; Static Load Rating (kN):80; d:100mm; |
| HMV56E / HMV 56E Hydraulic Nut 282x380x58mm | Dynamic Load Rating (kN):32.9; B:15mm; Weight:0.10 KGS; D:42mm; Availability:In Stock; Seals or Shields:Open Type; Clearance:Standard; d:20mm; Static Load Rating (kN):29.4; Cage Type:Steel; |
| CR99092 Stainless Steel Speedi Sleeve For Shaft Repair | Comparative axial load rating CFa:1420 kN; Mass bearing:720 kg; r3,4 min.:9999 mm; Calculation factor Y0:0.8; T:304.8 mm; D:9999 mm; Calculation factor Y1:0.77; Calculation factor e:0.88; d:635 mm; B:304.8 mm; |
| 86562 / CR86562 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Dynamic Load Rating (kN):19.3; Availability:In Stock; Weight:0.24 KGS; d:45mm; D:75mm; B:16mm; Static Load Rating (kN):27; Speed Rating (r/min):17900; Clearance:Standard; |
| 90198 / CR90198 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):3600; Cage Type:Steel; Weight:5.20 KGS; Dynamic Load Rating (kN):289; SKU:21317eae4-nsk; Seals or Shields:Open Type; B:41mm; d:85mm; |
| CR99837 Stainless Steel Speedi Sleeve For Shaft Repair | d:55.000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:90000 N; D:140.0000 mm; B:33.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:4100 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
CR99146 Stainless Steel Speedi Sleeve For Shaft Repair Video