| No. | Brand | J | F | f | T | A | s | S | r |
| 21% | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| F6800ZZ | - | - | - | - | - | - | - | - | - |
| P117FS21R | Rexroth | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 3200W | - | - | - | - | - | - | - | - | - |
| 21311 | NSK | - | - | - | - | - | - | - | - |
| 6206-2ZNRJEM, | SKF | - | - | - | - | - | - | - | - |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| 1 | Parker | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| 22230V | - | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 35X80X21X28 | - | - | - | - | - | - | - | - | - |
| 90/600 | - | - | - | - | - | - | - | - | - |
| 09263-16001-000 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1000mm | - | - | - | - | - | - | - | - | - |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| 2X(607Z | - | - | - | - | - | - | - | - | - |
| SL02 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| A2F10.12.23.28.45.55W3P1 | - | - | - | - | - | - | - | - | - |
| TKRS 10 Stroboscope | Clearance:Standard; Cage Type:Brass; B:20mm; SKU:61832ma-qbl; Seals or Shields:Open Type; Weight:0.20 KGS; D:200mm; d:160mm; Availability:In Stock; |
| AH210 Withdrawal Sleeve 45x50x28mm | Limiting Speed Rating (r/min):1300; d:150mm; Cage Type:Brass; Availability:In Stock; Dynamic Load Rating (kN):390; SKU:51330m-skf; Minimum Load Factor:10; Fatigue Load Rating (kN):34; Reference Speed Rating (r/min):900; Static Load Rating (kN):1290; |
| 85800 / CR85800 Stainless Speedi Sleeve For Shaft Repair | SKU:23220cke4c3-nsk; Seals or Shields:Open Type; d:100mm; Cage Type:Steel; Grease Limiting Speed (r/min):1600; Availability:In Stock; Static Load Rating (kN):605; Oil Limiting Speed (r/min):2200; Weight:6.60 KGS; Dynamic Load Rating (kN):420; |
| TMBP 20E Blind Housing Puller Kit | h:61.913 mm; H:398.462 mm; Stabilizing ring:SR-38-32; End plug (suffix Y):EPR 21; L:711.2 mm; N1:34.925 mm; Ca:101.803 mm; Cap bolt recommended tightening torque:1735.4 N·m; Da:339.999 mm; Cap bolt:1 1/8-7 UNC; |
| AS6590 Thrust Needle Roller Bearing Washer 65x90x1mm | Grease Limiting Speed (r/min):17700; Seals or Shields:Open Type; Weight:0.02 KGS; Availability:In Stock; D:85mm; Clearance:Standard; d:45mm; Preload:Medium; Static Load Rating (kN):28.8; Cage Type:Plastic; |
| TRA2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x0.8mm | N1:12.5 mm; Basic static load rating C0:6.55 kN; Recommended tightening torque for grub screw:4 N·m; A:32 mm; Housing:SYWK 504 Y; B:31 mm; J:96 mm; Basic dynamic load rating C:10.8 kN; L:126 mm; H1:33.3 mm; |
| 87911 / CR87911 Stainless Speedi Sleeve For Shaft Repair | d1:131.762 mm; Lock nut:AN 30; Hydraulic nut:HMVC 30E; B4:28.575 mm; Threads per inch:12; Mass adapter sleeve assembly:7.25 kg; B1:107.467 mm; d:150 mm; Sleeve:S 30x5.3/16; Lock washer:W 30; |
| AOH3072G(23072CCK, 23072CAK, 23072CCK/W33, C3072KM Bearing Withdrawal Sleeve) | d:50mm; Weight:0.61 KGS; Seals or Shields:Open Type; Static Load Rating (kN):119; Availability:In Stock; Dynamic Load Rating (kN):99; B:23mm; Grease Limiting Speed (r/min):5000; D:90mm; Oil Limiting Speed (r/min):6300; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
CR99139 Stainless Steel Speedi Sleeve For Shaft Repair Video