| No. | Brand | J | F | f | T | A | s | S | r |
| PC400-7 | - | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| 7212CTRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| F12 | - | - | - | - | - | - | - | - | - |
| 19360 | - | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6416 | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 7014CD/P4A | SKF | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| PV-2-1144 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| RW117 | Timken | - | - | - | - | - | - | - | - |
| HMVC14E | SKF | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| AOH24180(24180ECCK30/W33, 24180CCK, 24180CAK Bearing Withdrawal Sleeve) | Clearance:Standard; Weight:0.20 KGS; D:3.313 inch; d:2 inch; B:0.625 inch; Seals or Shields:Open Type; SKU:xlj2-r&m; Availability:In Stock; |
| 86563 / CR86563 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; d:25mm; B:17mm; D:62mm; Availability:In Stock; SKU:6305-2rs/c3-qbl; Clearance:C3; Cage Type:Steel; |
| CR99187 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1220; Availability:In Stock; SKU:23134-e1a-k-m-c4-fag; Seals or Shields:Open Type; Static Load Rating (kN):1690; Cage Type:Brass; Limiting Speed Rating (r/min):2400; Reference Speed Rating (r/min):1460; Clearance:C4; D:280mm; |
| CR99822 Stainless Steel Speedi Sleeve For Shaft Repair | B:10 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; d:10 mm; Specific static load factor K0:45 N/mm²; D:16 mm; D1:20 mm; |
| HMV114E / HMV 114E Hydraulic Nut 572x716x85mm | Accessories:Chain Sheave Type- 2; Basic Interchange:-; Basic Interchange NDH:-; Basic Radial Load Rating-Static SCO:3440 lbf; Basic Interchange SPLIT:-; Basic Interchange BCA:-; Basic Interchange NSK:-; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:5730 lbf; |
| 99851 / CR99851 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; Limiting Speed Rating (r/min):1680; Dynamic Load Rating (kN):2380; Reference Speed Rating (r/min):890; Weight:0.02 KGS; Clearance:Standard; SKU:23244-e1-k-fag; Seals or Shields:Open Type; Availability:In Stock; d:220mm; |
| CPR12130225 Thrust Plate 130x225x12mm | B:28 mm; Material constant KM:330; d2 max.:94 mm; α:6 °; Basic static load rating C0:140 kN; r1 min.:0.6 mm; Mass rod end:1.85 kg; Specific dynamic load factor K:100 N/mm²; G:M 39x3; d:40 mm; |
| 86458 / CR86458 Stainless Speedi Sleeve For Shaft Repair | R1:120.65 mm; L:711.2 mm; J min.:549.275 mm; P120°:107 kN; J max.:619.125 mm; N1:34.925 mm; Initial grease fill:1672.65 g; Mass pillow block:172 kg; A2:339.725 mm; P150°:94.3 kN; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CR99820 Stainless Steel Speedi Sleeve For Shaft Repair Video