| No. | Brand | J | F | f | T | A | s | S | r |
| 750 | - | - | - | - | - | - | - | - | - |
| 2 | Parker | - | - | - | - | - | - | - | - |
| VOE14521451 | - | - | - | - | - | - | - | - | - |
| A4vg40ep4d1 | - | - | - | - | - | - | - | - | - |
| MBX80 | NTN | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 32213JR | INA | - | - | - | - | - | - | - | - |
| NNF5009-2LSNV | - | - | 108 mm | - | - | - | - | - | - |
| 6m | - | - | - | - | - | - | - | - | - |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 3528SMD/SMD | - | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| 12mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| 11 | - | - | - | - | - | - | - | - | - |
| 35BG05S7G-2DL | Nachi | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| MSA-01-X-30, | YUKEN | - | - | - | - | - | - | - | - |
| BMV630 | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 10-30 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| LH24D | RBC | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| EAZ 246 Induction Heater | Clearance:Standard; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):30000; Cage Type:Plastic; d:65mm; Static Load Rating (kN):150.6; SKU:s7013cega/p4a-skf; Availability:In Stock; Weight:0.43 KGS; Dynamic Load Rating (kN):20.3; |
| 30 mm x 72 mm x 19 mm 99560 / CR 99560 Stainless Speedi Sleeve For Shaft Repair | Reference speed:6700 r/min; da max.:53 mm; Fatigue load limit Pu:11.8 kN; Calculation factor e:0.33; ra max.:0.8 mm; a:16.993 mm; Limiting speed:8000 r/min; Mass bearing:0.65 kg; Db min.:76 mm; T:23.812 mm; Size (mm):30 mm x 72 mm x 19 mm ; |
| 99450 / CR 99450 Stainless Speedi Sleeve For Shaft Repair | Preload:Light; d:70mm; Seals or Shields:Open Type; Clearance:Standard; Dynamic Load Rating (kN):126; Cage Type:Plastic; Grease Limiting Speed (r/min):7500; B:35mm; Weight:0.02 KGS; Availability:In Stock; |
| 99339 / CR99339 Stainless Speedi Sleeve For Shaft Repair | B:126mm; D:380mm; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; d:180mm; Weight:0.02 KGS; SKU:22336-e1-qbl; |
| CP47095 Thrust Plate 70x94.3x4mm | Reference Speed Rating (r/min):4500; Availability:In Stock; Fatigue Load Rating (kN):3; D:270mm; Seals or Shields:Open Type; d:220mm; Static Load Rating (kN):110; Dynamic Load Rating (kN):78; B:24mm; SKU:61844/c3-skf; |
| AOH241/800G (241/800ECAK30/W33, 241/800CAK, 241/800CCK Bearing Withdrawal Sleeve) | Cage Type:Plastic; Static Load Rating (kN):38.7; d:40mm; SKU:3mm208wicrsum-timken; Weight:0.35 KGS; Dynamic Load Rating (kN):22.7; Availability:In Stock; Clearance:Standard; Speed Rating (r/min):17400; B:18mm; |
| FTRB4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x1.5mm | ra max.:6 mm; d1 ≈:430.9 mm; D:479.425 mm; a:92 mm; d:381 mm; Dimension series:L 865500; da max.:406 mm; Basic dynamic load rating C:638 kN; r1,2 min.:6.4 mm; C:34.925 mm; |
| TRD512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x3.2mm | SKU:qj211ma-skf; Cage Type:Brass; Fatigue Load Rating (kN):3.55; Weight:0.77 KGS; Limiting Speed Rating (r/min):11000; D:100mm; Reference Speed Rating (r/min):8000; Dynamic Load Rating (kN):85; Clearance:Standard; Seals or Shields:Open Type; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
CR99122 Stainless Steel Speedi Sleeve For Shaft Repair Video