| No. | Brand | J | F | f | T | A | s | S | r |
| 27pc | - | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 50X90X20 | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| PC120-5 | Komatsu | - | - | - | - | - | - | - | - |
| K89315-TV | INA | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| 19360 | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 960 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | 74 mm | - | - | - | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| PC400-7 | - | - | - | - | - | - | - | - | - |
| 200 | NTN | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| MSA-01-X-30, | YUKEN | - | - | - | - | - | - | - | - |
| HMV102E / HMV 102E Hydraulic Nut 512x648x80mm | d:59.987 mm; rb max.:3.3 mm; Da min.:102 mm; Calculation factor e:0.83; ra max.:3.5 mm; d1 ≈:97.1 mm; db min.:73.5 mm; da max.:74 mm; Ca min.:5 mm; Calculation factor Y:0.72; |
| TRC6074 Thrust Bearing Ring / Thrust Needle Bearing Washer 95.25x117.475x2.4mm | Duty cycle tolerance ±:10 %; Limiting speed:300 r/min; Cable connector type:AMP Superseal; Duty cycle:50 %; Number of pulses per revolution N:256; Phase shift output signal:90 °; Mass sensor unit:0.57 kg; Period accuracy ±:8 %; Phase shift output signal tolerance ±:30 °; |
| AHX2320 Withdrawal Sleeve(matched Bearing:2320K, 22320EK, C2320K) | SKU:6311-2z/c3gjn-skf; Weight:0.02 KGS; Static Load Rating (kN):45; B:29mm; d:55mm; Seals or Shields:Two Metal Shields; Limiting Speed Rating (r/min):6300; Clearance:C3; Availability:In Stock; D:120mm; |
| TRA4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x0.8mm | Fatigue Load Rating (kN):--; Dynamic Load Rating (kN):6.8; SKU:6201zznr-nsk; Clearance:Standard; Cage Type:Steel; d:12mm; Availability:In Stock; Seals or Shields:Two Metal Shields; Static Load Rating (kN):3.05; B:10mm; |
| ZM60 Precision Locknut (M60x2)x80x16mm | Oil Speed Rating Open/Shielded n2:43000 rpm; Fillet Radius ra:0.30 mm; B:7.00 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:1360 N; d:8.000 mm; Sealed Speed Rating n3:23000 rpm; Basic Dynamic Radial Load Rating C:3250 N; D:22.0000 mm; |
| AOH24072(24072CCK, 24072CAK, 24072CCK30/W33 Bearing Withdrawal Sleeve) | Locating ring:2 x FRB 17/280; L:510 mm; s:14 mm; Appropriate attachment bolt, size G:24 mm; P180°:850 kN; Oil level, min.:47 mm; H:333 mm; P150°:680 kN; Bearing (basic designation):C 3036 K; Ca:108 mm; |
| FTRB1528 Thrust Bearing Ring / Thrust Needle Bearing Washer 15x28x1.5mm | Availability:In Stock; Seals or Shields:Open Type; Limiting Speed Rating (r/min):3800; B:37mm; Static Load Rating (kN):255; d:240mm; Reference Speed Rating (r/min):2100; Weight:12.70 KGS; SKU:16048-c3-fag; D:360mm; |
| 99605 / CR99605 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):285; Seals or Shields:Open Type; Fatigue Load Rating (kN):12.3; D:200mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Cage Type:Brass; Dynamic Load Rating (kN):250; Clearance:C3; Weight:5.66 KGS; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
CR99865 Stainless Steel Speedi Sleeve For Shaft Repair Video