| No. | Brand | J | F | f | T | A | s | S | r |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 16-0-1 | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 6210 | FAFNIR | - | - | - | - | - | - | - | - |
| 4TNV98 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 2 | Thomson | - | - | - | - | - | - | - | - |
| 10-30 | - | - | - | - | - | - | - | - | - |
| 70BNR10ETYNDUELP4 | NSK | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| 36W | INA | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| 22310-E1-T41A | fag | - | - | - | - | - | - | - | - |
| 83-87 | koyo | - | - | - | - | - | - | - | - |
| Mg15g1.2 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 90113 / CR90113 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):61; Dynamic Load Rating (kN):48.5; Seals or Shields:Open Type; d:160mm; Grease Limiting Speed (r/min):2600; B:20mm; Availability:In Stock; Weight:1.23 KGS; D:200mm; Clearance:Standard; |
| AOH240/1000 (240/1000CAK, 240/1000CCK, 240/1000CCK/W33,240/1000CAK30F/W33 Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Seals or Shields:Non-Contact Seal; Availability:In Stock; Cage Type:Steel; Reference Speed Rating (r/min):--; Limiting Speed Rating (r/min):10000; d:20mm; Static Load Rating (kN):7.9; Dynamic Load Rating (kN):15.9; B:15mm; |
| 99367 / CR99367 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:7500 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:20400 N; d:25.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:10000 rpm; Grease Speed Rating n1:7500 rpm; B:25.40 mm; |
| 86547 / CR86547 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; B:18mm; Cage Type:Plastic; Seals or Shields:Open Type; d:40mm; Availability:In Stock; Weight:0.02 KGS; SKU:1208tn-qbl; D:80mm; |
| 84643 / CR84643 Stainless Speedi Sleeve For Shaft Repair | d:6mm; Seals or Shields:Two Metal Shields; B:4.5mm; Cage Type:Steel; D:13mm; Clearance:Standard; Availability:In Stock; Weight:0.20 KGS; SKU:s686-2zw4.5-zen; |
| 99630 / CR99630 Stainless Speedi Sleeve For Shaft Repair | Preload:Medium; D:145mm; Oil Limiting Speed (r/min):14600; SKU:7019ctrdump3-nsk; Cage Type:Plastic; Grease Limiting Speed (r/min):9600; Static Load Rating (kN):73; Seals or Shields:Open Type; Clearance:Standard; Dynamic Load Rating (kN):73.5; |
| TMHS 100 Hydraulic Spindle | Fillet Radius ra:2.50 mm; d:130.000 mm; Basic Dynamic Radial Load Rating C:319000 N; Fillet Radius rb:1.00 mm; B:80.00 mm; Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:415000 N; D:230.0000 mm; |
| TMST 3 Electronic Stethoscope | F:10 mm; B:10 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg; d:6 mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99112 Stainless Steel Speedi Sleeve For Shaft Repair Video