| No. | Brand | J | F | f | T | A | s | S | r |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 3200W | - | - | - | - | - | - | - | - | - |
| 19 | - | - | - | - | - | - | - | - | - |
| 2006 | - | - | - | - | - | - | - | - | - |
| 307PP | Nachi | - | - | - | - | - | - | - | - |
| 6212LLB/2A, | NTN | - | - | - | - | - | - | - | - |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| RW117 | Timken | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 2.2 | Dodge | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 3780 | Timken | - | - | - | - | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| WE6Y5/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 99.7%Min | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 99287 / CR99287 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Cage Type:Plastic; Clearance:Standard; Preload:Medium; Dynamic Load Rating (kN):18.3; Availability:In Stock; D:85mm; SKU:7912a5trdump3-nsk; d:60mm; Oil Limiting Speed (r/min):20700; |
| FTRC1226 Thrust Bearing Ring / Thrust Needle Bearing Washer 12x26x2mm | Oil Limiting Speed (r/min):3300; Static Load Rating (kN):270; Dynamic Load Rating (kN):168; D:140mm; Grease Limiting Speed (r/min):2500; Seals or Shields:Open Type; Cage Type:Steel; Clearance:Standard; d:90mm; Availability:In Stock; |
| TMDT 2-35 Sharp Tip Probe | Seals or Shields:Open Type; Clearance:Standard; Cage Type:Steel; Availability:In Stock; B:53mm; d:110mm; SKU:22222-e1-qbl; Weight:0.02 KGS; D:200mm; |
| 99864 / CR99864 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; Dynamic Load Rating (kN):92.5; Seals or Shields:Open Type; Cage Type:Plastic; SKU:3mm218wicrdul-timken; Weight:2.20 KGS; D:160mm; d:90mm; B:30mm; |
| 70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter 99552 / CR 99552 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):660; SKU:24048-e1-c3-fag; Availability:In Stock; D:400mm; Limiting Speed Rating (r/min):1200; Cage Type:Steel; Weight:80.70 KGS; Seals or Shields:Open Type; Dynamic Load Rating (kN):2120; B:160mm; Size (mm):70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter ; |
| AH220 Withdrawal Sleeve 95x100x45mm | Clearance:Standard; Cage Type:Steel; Weight:1.15 KGS; Oil Limiting Speed (r/min):3800; d:150mm; Availability:In Stock; Static Load Rating (kN):58.5; Seals or Shields:Non-Contact Seal; B:20mm; D:190mm; |
| H3060 Adapter Sleeve Supplier | End cover:ASNH 217 R; Pa:155 kN; A1:90 mm; Cap bolt, size:M 12x80; Appropriate attachment bolt, rec. tightening torque:385 N·m; Da:150 mm; N4 max.:8 mm; Cap bolt, rec. tightening torque:80 N·m; Bearing (basic designation):C 2314; db:80 mm; |
| AHX315 Withdrawal Sleeve 70x75x45mm | Mass angle ring:14.5 kg; B1:25 mm; B2:48 mm; d:480 mm; r3,4 min.:6 mm; d1 ≈:557 mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
CR99083 Stainless Steel Speedi Sleeve For Shaft Repair Video