| No. | Brand | J | F | f | T | A | s | S | r |
| 100% | - | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 6.38 | INA | - | - | - | - | - | - | - | - |
| 2006 | - | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| Zdr10dp1-40b/75y | - | - | - | - | - | - | - | - | - |
| (10)MR95ZZ | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 6304-2RS | SKF | - | - | - | - | - | - | - | - |
| ALL72281 | Timken | - | - | - | - | - | - | - | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| (20pcs) | - | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| Sg02 | - | - | - | - | - | - | - | - | - |
| NU2315-E-XL-M1A-C3 | fag | - | - | - | - | - | - | - | - |
| 627 | fag | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 12/24V | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| HMV64E / HMV 64E Hydraulic Nut 322x428x63mm | Oil Limiting Speed (r/min):1000; B:138mm; Static Load Rating (kN):2990; D:420mm; Weight:92.60 KGS; Cage Type:Brass; d:200mm; Clearance:Standard; SKU:22340camke4-nsk; Seals or Shields:Open Type; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| CR99129 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Fatigue Load Rating (kN):88; Clearance:Standard; Static Load Rating (kN):1010; Dynamic Load Rating (kN):760; D:225mm; Reference Speed Rating (r/min):1930; Limiting Speed Rating (r/min):2800; Cage Type:Plastic; Weight:0.02 KGS; |
| CR99268 Stainless Steel Speedi Sleeve For Shaft Repair | B:30 mm; Tolerance shaft:f7 m/s; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Mass bushing:0.1 kg; D:55 mm; d:50 mm; Coefficient of friction µ max.:0.15; Coefficient of friction µ min.:0.08; |
| 84156 / CR84156 Stainless Speedi Sleeve For Shaft Repair | G:219.151 mm; B1:183.566 mm; Lock washer:W 44; d:220 mm; Threads per inch:8; Sleeve:S 144x7.13/16; B:32.004 mm; d1:198.438 mm; Hydraulic nut:HMVC 44E; Mass adapter sleeve assembly:21 kg; |
| AHX311 Withdrawal Sleeve (1311EK Bearing) | P180°:60.9 kN; H2:50.8 mm; Adapter sleeve assembly:SNW 22x4; Bearing limiting speed:4300 r/min; da:101.6 mm; J1:69.85 mm; Stabilizing ring:2 x SR-1522; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; |
| AH314G Withdrawal Sleeve (matched Bearing:22214EK, 21314CCK, C2214KTN9,C2214KV) | Cage Type:Plastic; Weight:0.64 KGS; Availability:In Stock; Speed Rating (r/min):9900; D:115mm; Clearance:Standard; d:75mm; SKU:3mm9115wicrsum-timke; B:20mm; Dynamic Load Rating (kN):41.2; |
| BIC11050 Inner Ring 50x62.1x24mm | Oil Limiting Speed (r/min):4300; Cage Type:Steel; SKU:2315kj-nsk; Availability:In Stock; Clearance:Standard; d:75mm; Static Load Rating (kN):43; B:55mm; D:160mm; Grease Limiting Speed (r/min):3400; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CR99076 Stainless Steel Speedi Sleeve For Shaft Repair Video