| No. | Brand | J | F | f | T | A | s | S | r |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 09263-16001-000 | - | - | - | - | - | - | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 1W | - | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| NU306E.M1 | fag | - | 155 mm | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| 707-98-58240 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| (CC24SC, | INA | - | - | - | - | - | - | - | - |
| AOH30/800 (230/800CAK/W33, C30/800KMB, C30/800K, 230/800CAK, 230/800CCK Bearing Withdrawal Sleeve) | r3,4 min.:4 mm; Basic dynamic load rating C:1427 kN; D:320 mm; Calculation factor Y2:1.2; rc max.:1.5 mm; d:150 mm; Calculation factor Y1:0.81; K:15 mm; Da min.:251 mm; Fatigue load limit Pu:200 kN; |
| 150x180x15HMSA10V Shaft Oil Seal 150x180x15mm | Cage Type:Steel; B:40mm; Weight:5.62 KGS; Availability:In Stock; Seals or Shields:Open Type; SKU:6224-fag; Fatigue Load Rating (kN):6.2; Static Load Rating (kN):122; Reference Speed Rating (r/min):4300; d:120mm; |
| 10 mm x 30 mm x 9 mm TRE1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x4mm | Dynamic Load Rating (kN):67.4; B:20mm; Seals or Shields:Open Type; D:62mm; Limiting Speed Rating (r/min):7800; Reference Speed Rating (r/min):9700; Clearance:Standard; Cage Type:Steel; Static Load Rating (kN):60.8; Weight:0.30 KGS; Size (mm):10 mm x 30 mm x 9 mm ; |
| 87462 / CR87462 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):90; SKU:4216-b-tvh-fag; Weight:2.14 KGS; d:80mm; Availability:In Stock; Seals or Shields:Open Type; Limiting Speed Rating (r/min):4000; Clearance:Standard; Cage Type:Plastic; B:33mm; |
| AOH241/900 (241/900ECAK30/W33, 241/900CAK, 241/900CCK, 241/900ECCK Bearing Withdrawal Sleeve) | Seals or Shields:Two Rubber Seals; Cage Type:Steel; D:16mm; d:5mm; Weight:0.01 KGS; SKU:625-2rs-fag; Limiting Speed Rating (r/min):24000; Availability:In Stock; Dynamic Load Rating (kN):1.32; Fatigue Load Rating (kN):0.0224; |
| HMV11E / HMV 11E Hydraulic Nut (M55x2)x120x42mm | s:41.275 mm; J:273.05 mm; Mass bearing unit:24 kg; L:320.278 mm; A3:36.513 mm; A6:28.575 mm; B:116.681 mm; S:0.794 mm; A5:46.831 mm; Limiting speed:700 r/min; |
| 87872 / CR87872 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:2400 rpm; Grease Speed Rating n1:2400 rpm; d:90.000 mm; Oil Speed Rating n2:3400 rpm; D:160.0000 mm; Fillet Radius ra:2.00 mm; B:52.40 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:130000 N; Basic Static Radial Load Rating Co:120000 N; |
| AOH24044 Withdrawal Sleeve(24044CCK, 24044CAK, 24044CCK30/W33, C4044K30V Bering) | d:140mm; Static Load Rating (kN):945; Oil Limiting Speed (r/min):1600; SKU:23128ce4c3-nsk; B:68mm; Cage Type:Steel; Dynamic Load Rating (kN):580; Availability:In Stock; Clearance:C3; Weight:10.50 KGS; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
CR99060 Stainless Steel Speedi Sleeve For Shaft Repair Video