| No. | Brand | J | F | f | T | A | s | S | r |
| 1040T | Rexnord | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| 3mm/3.6mm/5mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 6212RCE | NSK | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | 350 mm | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 80W | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| AH3040G Withdrawal Sleeve(matched Bearing:23040CCK,23040CAK, 23040CCK/W33, C3040K) | Accessories:One Seal; Sealed Speed Rating n3:0 rpm; Basic Static Radial Load Rating Co:140000 N; D:300.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; B:28.00 mm; d:240.000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Grease Speed Rating Open/Shielded n1:1800 rpm; |
| AH3034 Withdrawal Sleeve(matched Bearing:23034CCK/W33, C3034K) | B:27.00 mm; Basic Static Radial Load Rating Co:20400 N; D:62.0000 mm; Basic Dynamic Radial Load Rating C:28600 N; Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:7000 rpm; Sealed Speed Rating n3:7000 rpm; d:30.000 mm; |
| 99324 / CR99324 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Weight:0.02 KGS; B:64mm; SKU:22318-e1a-k-ma-t41a-; Cage Type:Brass; D:190mm; Clearance:Standard; d:90mm; Seals or Shields:Open Type; |
| CR99828 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bearing:67 kg; Basic dynamic load rating C:1340 kN; T:80.963 mm; Calculation factor e:0.37; Da max.:660 mm; D:692.15 mm; r1,2 min.:6.4 mm; C:61.913 mm; Ca min.:13 mm; Da min.:646 mm; |
| TKED 1 Electrical Discharge Detector Pen | Preload:Light; Availability:In Stock; Seals or Shields:Open Type; D:200mm; Dynamic Load Rating (kN):140; Fatigue Load Rating (kN):4.9; Clearance:Standard; Cage Type:Plastic; SKU:7026acd/p4atbta-skf; Oil Limiting Speed (r/min):9000; |
| FTRA100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1mm | Limiting speed:30000 r/min; ra max.:1 mm; Reference speed:17000 r/min; F:26.5 mm; D:47 mm; B:14 mm; d:20 mm; Basic static load rating C0:22 kN; db min.:31 mm; Basic dynamic load rating C:28.5 kN; |
| TRC3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x2.4mm | B:6mm; SKU:6900dd-nsk; Availability:In Stock; Static Load Rating (kN):1.27; Clearance:Standard; Grease Limiting Speed (r/min):32000; D:22mm; Dynamic Load Rating (kN):2.7; d:10mm; Oil Limiting Speed (r/min):38000; |
| 89947 / CR89947 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Static Load Rating (kN):5; Limiting Speed Rating (r/min):11000; Dynamic Load Rating (kN):9.4; Seals or Shields:Non-Contact Seal; D:42mm; Fatigue Load Rating (kN):--; Cage Type:Steel; d:20mm; B:12mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
CR99058 Stainless Steel Speedi Sleeve For Shaft Repair Video