| No. | Brand | J | F | f | T | A | s | S | r |
| 1 | - | - | - | - | - | - | - | - | - |
| KM-29 | SKF | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| (JS-SSN003) | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 3LB1 | - | - | - | - | - | - | - | - | - |
| 51330F | SKF | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| PGH4 | Rexroth | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | 8 mm | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | - | - |
| 8*10W | - | - | - | - | 400.05 mm | - | - | - | - |
| EAZ 222-2 Induction Heater | Limiting Speed Rating (r/min):780; Static Load Rating (kN):3140; Weight:45.00 KGS; Reference Speed Rating (r/min):920; B:90mm; D:480mm; Availability:In Stock; Cage Type:Brass; Dynamic Load Rating (kN):1710; Clearance:Standard; |
| AS7095 Thrust Needle Roller Bearing Washer 70x95x1mm | Calculation factor kr:0.4; Limiting speed:400 r/min; da min.:207 mm; r3,4 min.:0.6 mm; -:0.2 mm; ra max.:2 mm; Basic static load rating C0:2900 kN; B:150 mm; Mass bearing:42 kg; Ca1:120 mm; |
| AH226 Withdrawal Sleeve 125x130x53mm | Dynamic Load Rating (kN):255; d:190mm; Reference Speed Rating (r/min):2600; SKU:6238-m-c3-fag; Fatigue Load Rating (kN):11.6; Availability:In Stock; Clearance:C3; Weight:22.60 KGS; Cage Type:Brass; Seals or Shields:Open Type; |
| AHX256 Withdrawal Sleeve 260x280x105mm | Cage Type:Plastic; Seals or Shields:Open Type; Clearance:Standard; B:13mm; Fatigue Load Rating (kN):0.14; Availability:In Stock; SKU:1302etn9-skf; D:42mm; Weight:0.02 KGS; Dynamic Load Rating (kN):10.8; |
| 87513 / CR87513 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; d:8mm; Availability:In Stock; Seals or Shields:Two Metal Shields; Weight:0.20 KGS; Clearance:Standard; B:3.5mm; SKU:smf128-2z-zen; D:12mm; |
| AH24056G Withdrawal Sleeve Supplier | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; Basic Static Radial Load Rating Co:62000 N; Grease Speed Rating Open/Shielded n1:5000 rpm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:99500 N; Accessories:Two Seals; B:33.00 mm; d:55.000 mm; |
| CR99150 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:55mm; Seals or Shields:Open Type; Grease Limiting Speed (r/min):23600; Dynamic Load Rating (kN):14.4; Static Load Rating (kN):9.8; Preload:Medium; SKU:7006a5trdump3-nsk; Oil Limiting Speed (r/min):35300; Clearance:Standard; |
| 86343 / CR86343 Stainless Speedi Sleeve For Shaft Repair | Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Mass bushing:0.004 kg; Tolerance housing:H7; d:6 mm; B:6 mm; Specific static load factor K0:45 N/mm²; D:12 mm; Tolerance shaft:e7; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CR99056 Stainless Steel Speedi Sleeve For Shaft Repair Video