| No. | Brand | J | F | f | T | A | s | S | r |
| 15mm | INA | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| 99.7%Min | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| /100W/Ce/RoHS/Lighting | - | - | - | - | - | - | - | - | - |
| 12/15/16/17/18/19mm | - | - | - | - | - | - | - | - | - |
| 6210 | FAFNIR | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| 7014CD/P4A | SKF | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| 1220mmx2440mmx18mm | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| BH-1614 | koyo | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| IP20/IP44/IP67 | - | - | - | - | - | - | - | - | - |
| NJ2309 | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| FTRB3552 Thrust Bearing Ring / Thrust Needle Bearing Washer 35x52x1.5mm | Weight:0.02 KGS; B:30.2mm; D:85mm; Availability:In Stock; SKU:3209b-2znrtnc3-qbl; d:45mm; Cage Type:Plastic; Seals or Shields:Two Metal Shields; Clearance:C3; |
| AOH24084 (24084ECAK30/W33, 24084CAK, 24084CCK Bearing Withdrawal Sleeve) | Calculation factor e:0.33; Mass bearing:395 kg; Fatigue load limit Pu:1370 kN; D1 ≈:606 mm; Comparative radial load rating CF:1660 kN; Comparative axial load rating CFa:273 kN; Calculation factor Y1:2; Calculation factor Y2:3; Design variant/feature:TQOSN/GWSI; B:422.275 mm; |
| AHX3120 Withdrawal Sleeve(matched Bearing:23120CCK/W33, C2320K, C3120K, C3120KV) | Limiting Speed Rating (r/min):4000; Availability:In Stock; Fatigue Load Rating (kN):50; d:85mm; Dynamic Load Rating (kN):540; Cage Type:Steel; Reference Speed Rating (r/min):3200; Seals or Shields:Open Type; D:180mm; Clearance:Standard; |
| HMV12E / HMV 12E Hydraulic Nut (M60x2)x125x43mm | Seals or Shields:Open Type; Clearance:Standard; B:52.4mm; Cage Type:Steel; SKU:23218cck/w33-qbl; Availability:In Stock; D:160mm; Weight:0.02 KGS; d:90mm; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter CR99062 Stainless Steel Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):44000; D:16mm; B:5mm; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):1.7; Weight:0.00 KGS; Clearance:Standard; Cage Type:Steel; d:5mm; Static Load Rating (kN):0.67; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter ; |
| TRB2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x1.6mm | Db2:71 mm; J:70 mm; A1:12 mm; B1:33 mm; T:40 mm; Basic static load rating C0:7.8 kN; Fatigue load limit Pu:0.335 kN; Basic dynamic load rating C:14 kN; N4:4 mm; J6:83 mm; |
| CMIN 400-K Ultrasonic Probe | D:120.0000 mm; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:73500 N; B:38.10 mm; Grease Speed Rating n1:3600 rpm; d:65.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4800 rpm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:80600 N; |
| CPR870125 Thrust Plate 70x125x8mm | Tolerance shaft:h8; B:16 mm; Specific static load factor K0:20 N/mm²; Mass bushing:0.016 kg; D1:22 mm; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; D:16 mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
CR170x200x15HMSA10 V Shaft Oil Seal 170x200x15mm Video