| No. | Brand | J | F | f | T | A | s | S | r |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 4*100W | - | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| F600B-V | Parker | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| (22X28X16) | - | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| Catsbs80 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| SHF20-XRB | - | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| MM212KS2CR | FAFNIR | - | - | - | - | - | - | - | - |
| P315/P330 | Parker | - | - | - | - | - | - | - | - |
| 800mm | - | - | - | - | - | - | - | - | - |
| CPR15170280 Thrust Plate 170x280x15mm | D:170mm; Clearance:C3; SKU:6316-z-c3-fag; Static Load Rating (kN):86.5; Seals or Shields:Single Metal Shield; Reference Speed Rating (r/min):5500; Cage Type:Steel; B:39mm; d:80mm; Dynamic Load Rating (kN):122; |
| TRE6681 Thrust Bearing Ring / Thrust Needle Bearing Washer 104.775x128.575x4mm | B:16.00 mm; Basic Dynamic Radial Load Rating C:21200 N; D:75.0000 mm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:98000 rpm; Grease Speed Rating n1:0 rpm; d:45.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:17000 N; |
| CR99187 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1220; Availability:In Stock; SKU:23134-e1a-k-m-c4-fag; Seals or Shields:Open Type; Static Load Rating (kN):1690; Cage Type:Brass; Limiting Speed Rating (r/min):2400; Reference Speed Rating (r/min):1460; Clearance:C4; D:280mm; |
| CR99112 Stainless Steel Speedi Sleeve For Shaft Repair | α:15 °; B:28 mm; r1 min.:0.3 mm; Basic static load rating C0:58.5 kN; C1 max.:21 mm; l1 min.:48 mm; h:84 mm; dk:38.1 mm; l7 min.:27 mm; G:M 22x1.5; |
| Tapered Roller Bearings 1163X/1120NI 14.288x44.450x22.555mm | Basic Static Radial Load Rating Co:228000 N; Oil Speed Rating n2:4000 rpm; Fillet Radius rb:1.00 mm; d:75.000 mm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:3100 rpm; D:160.0000 mm; B:74.00 mm; Fillet Radius ra:2.00 mm; |
| CR99256 Stainless Steel Speedi Sleeve For Shaft Repair | Specific dynamic load factor K:140 N/mm²; Effective load carrying cross section A:33820 mm²; d:190 mm; D:210 mm; Coefficient of friction µ min.:0.03; Coefficient of friction µ max.:0.08; Mass bushing:2.11 kg; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; B:180 mm; |
| 87802 / CR87802 Stainless Speedi Sleeve For Shaft Repair | B:33mm; d:140mm; Grease Limiting Speed (r/min):5800; Clearance:Standard; Preload:Medium; Weight:0.02 KGS; Seals or Shields:Open Type; SKU:7028a5trdump3-nsk; Dynamic Load Rating (kN):125; Oil Limiting Speed (r/min):8600; |
| FTRB1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x1.5mm | Fatigue Load Rating (kN):0.57; d:50mm; Reference Speed Rating (r/min):14000; SKU:2210ektn9-skf; Weight:0.02 KGS; Static Load Rating (kN):11.2; Limiting Speed Rating (r/min):9500; Availability:In Stock; Cage Type:Plastic; Dynamic Load Rating (kN):33.8; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
CPR870125 Thrust Plate 70x125x8mm Video