| No. | Brand | J | F | f | T | A | s | S | r |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| 62/22 | koyo | - | - | - | - | - | - | - | - |
| WE6Y5/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| 6008.2ZR | fag | - | 248 mm | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 429,460. | - | - | - | - | - | - | - | - | - |
| 42... | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| 1.2 | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 16058 | - | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 35X12.50R20LT | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| rig,BMV630 | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| GG-4 | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| DSG-01-3C4-A120-N-7090 | YUKEN | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| FTRA2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x1mm | Weight:0.02 KGS; SKU:22324cc/w33-qbl; D:260mm; d:120mm; Availability:In Stock; Seals or Shields:Open Type; Cage Type:Steel; Clearance:Standard; B:86mm; |
| CR99192 Stainless Steel Speedi Sleeve For Shaft Repair | d:85mm; Availability:In Stock; B:28mm; Seals or Shields:Open Type; Fatigue Load Rating (kN):2.5; Static Load Rating (kN):64; Clearance:C3; Weight:0.02 KGS; SKU:6217/c3-skf; Cage Type:Steel; |
| FTRB80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x1.5mm | D:90mm; Seals or Shields:Open Type; Clearance:Standard; B:33mm; Cage Type:Brass; Limiting Speed Rating (r/min):5600; Dynamic Load Rating (kN):147; Weight:1.10 KGS; d:40mm; SKU:22308kemw33-timken; |
| CP590120 Thrust Plate 90x118.8x5mm | Static axial stiffnes:790 N/µm; da min.:32 mm; D:57 mm; r3,4 min.:0.6 mm; Fatigue load limit Pu:2.2 kN; Basic dynamic load rating C:30 kN; Attainable speed:3400 r/min; d:25 mm; rb max.:0.6 mm; ra max.:0.3 mm; |
| CP480105 Thrust Plate 80x104.3x4mm | B5:82 mm; D:650 mm; Calculation factor e:0.28; Reference speed:530 r/min; Basic static load rating C0:7650 kN; db min.:421 mm; da max.:475 mm; Calculation factor Y0:2.5; d2 ≈:475 mm; r1,2 min.:6 mm; |
| AOH30/630 (230/630CAK, 230/630CCK, 230/630CAK/W33, C30/630KM Bearing Withdrawal Sleeve) | Reference Speed Rating (r/min):1300; Cage Type:Brass; Dynamic Load Rating (kN):2330; Seals or Shields:Open Type; Availability:In Stock; Clearance:C3; Static Load Rating (kN):2950; D:440mm; B:120mm; d:240mm; |
| AOH241/670 (241/670ECAK30/W33, 241/670CCK, 241/670CAK, 241/670CAK/W33 Bearing Withdrawal Sleeve) | Clearance:C3; Static Load Rating (kN):1690; Weight:41.50 KGS; Grease Limiting Speed (r/min):1100; d:150mm; Oil Limiting Speed (r/min):1400; Availability:In Stock; B:108mm; Dynamic Load Rating (kN):1220; D:320mm; |
| HMV19E / HMV 19E Hydraulic Nut (M95x2)x162x43mm | Seals or Shields:Open Type; Reference Speed Rating (r/min):32000; Dynamic Load Rating (kN):12.7; Fatigue Load Rating (kN):0.18; Cage Type:Plastic; Clearance:Standard; D:47mm; Weight:0.02 KGS; SKU:1204ektn9-skf; B:14mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CPR81212 Thrust Plate 60x95x7.5mm Video