| No. | Brand | J | F | f | T | A | s | S | r |
| 3000 | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| 314SF | TRW | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| NA4908 | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| (NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| 3026 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| (JHK-S06) | - | - | - | - | - | - | - | - | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| 24755 | - | - | - | - | - | - | - | - | - |
| P117FS21R | Rexroth | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| NJ219G | Nachi | - | - | - | - | - | - | - | - |
| 250 | - | - | - | - | - | 9 mm | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| TRC3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x2.4mm | Weight:7.00 KGS; Availability:In Stock; B:42mm; SKU:3mm9134wicrsum-timke; Clearance:Standard; Static Load Rating (kN):221.1; Seals or Shields:Open Type; d:170mm; Cage Type:Plastic; Speed Rating (r/min):4400; |
| HMV13 / HMV 13 Hydraulic Nut (M65x2)x130x43mm | D:180mm; Static Load Rating (kN):96.5; Dynamic Load Rating (kN):132.7; Reference Speed Rating (r/min):7200; Limiting Speed Rating (r/min):5000; Weight:4.16 KGS; Availability:In Stock; Seals or Shields:Open Type; B:41mm; Cage Type:Steel; |
| WRE310 Snap Ring 298x310x4mm | Grease Limiting Speed (r/min):3400; Cage Type:Plastic; D:120mm; Clearance:Standard; B:49.2mm; Seals or Shields:Open Type; Weight:2.53 KGS; Dynamic Load Rating (kN):106000; Static Load Rating (kN):78800; Oil Limiting Speed (r/min):4700; |
| AOH31/630 (231/630CAK/W33, C31/630KMB, 231/630CAK, 231/630CCK Bearing Withdrawal Sleeve) | Clearance:C3; Availability:In Stock; D:72mm; Weight:0.02 KGS; SKU:2207etn9/c3-qbl; d:35mm; Cage Type:Plastic; Seals or Shields:Open Type; B:23mm; |
| CP590120 Thrust Plate 90x118.8x5mm | Static axial stiffnes:790 N/µm; da min.:32 mm; D:57 mm; r3,4 min.:0.6 mm; Fatigue load limit Pu:2.2 kN; Basic dynamic load rating C:30 kN; Attainable speed:3400 r/min; d:25 mm; rb max.:0.6 mm; ra max.:0.3 mm; |
| 99498 / CR 99498 Stainless Speedi Sleeve For Shaft Repair | B:24mm; Seals or Shields:Open Type; Oil Limiting Speed (r/min):13000; Dynamic Load Rating (kN):74.1; D:140mm; d:90mm; Grease Limiting Speed (r/min):8500; SKU:7018acd/p4atbta-skf; Static Load Rating (kN):72; Availability:In Stock; |
| CR99275 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; SKU:3210a-2z-skf; B:30.2mm; Cage Type:Steel; Clearance:Standard; Fatigue Load Rating (kN):1.66; Dynamic Load Rating (kN):51; d:50mm; Reference Speed Rating (r/min):7000; Limiting Speed Rating (r/min):7000; |
| FTRA100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1mm | Limiting speed:30000 r/min; ra max.:1 mm; Reference speed:17000 r/min; F:26.5 mm; D:47 mm; B:14 mm; d:20 mm; Basic static load rating C0:22 kN; db min.:31 mm; Basic dynamic load rating C:28.5 kN; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
CP9240300 Thrust Plate 240x298.5x9mm Video