| No. | Brand | J | F | f | T | A | s | S | r |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| NUP311 | NSK | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| 4900 | SKF | - | - | - | - | - | - | - | - |
| 42060 | - | - | - | - | - | - | - | - | - |
| 1648 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| GG-4 | - | - | - | - | - | - | - | - | - |
| 201 | - | - | - | - | - | - | - | - | - |
| 5/10/20 | - | 47.6 mm | - | - | - | - | - | - | - |
| sae4130 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 4K19N4TS3 | Danfoss | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| 6304-2RS | SKF | - | - | - | - | - | - | - | - |
| 40BCV09S1-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| MCV3_ | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| 2006 | Timken | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| Dh200 | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| CR99834 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Plastic; Static Load Rating (kN):29.935; SKU:2mmvc9318hxcrsul-tim; Availability:In Stock; d:90mm; Weight:0.57 KGS; Seals or Shields:Open Type; B:18mm; Dynamic Load Rating (kN):19.972; Clearance:Standard; |
| CP3552 Thrust Plate 35x51.5x0.8mm | B:29mm; SKU:21311-e1-tvpb-c3-qbl; Seals or Shields:Open Type; Availability:In Stock; d:55mm; D:120mm; Cage Type:Plastic; Clearance:C3; Weight:0.02 KGS; |
| AHX2319 Withdrawal Sleeve(matched Bearing:2319K, 22319EK, C2319K) | Ca:73.787 mm; R1:73.025 mm; da:82.55 mm; PG:1/8 NPT; Bearing:22318 EK; J1:57.15 mm; Cap bolt:2 x 3/4-10 UNC; Bearing limiting speed:3600 r/min; P180°:54.3 kN; End plug (suffix Y):EPR 11; |
| TIH 100M/MV Bearing Induction Heater | Limiting Speed Rating (r/min):9000; Availability:In Stock; Reference Speed Rating (r/min):5500; Static Load Rating (kN):86.5; d:80mm; B:39mm; SKU:6316-m-fag; Seals or Shields:Open Type; D:170mm; Weight:3.75 KGS; |
| 99293 / CR99293 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:30mm; Clearance:Standard; Grease Limiting Speed (r/min):22000; Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):1.19; SKU:1200j-nsk; Dynamic Load Rating (kN):5.55; Oil Limiting Speed (r/min):28000; |
| 86090 / CR86090 Stainless Speedi Sleeve For Shaft Repair | SKU:s696a-zen; Availability:In Stock; Weight:0.20 KGS; B:5mm; Seals or Shields:Open Type; d:6mm; Cage Type:Steel; D:16mm; Clearance:Standard; |
| TKTL 40 Dual Laser Infrared And Contact Video Thermometer | SKU:7948ctrsump3-nsk; B:38mm; Dynamic Load Rating (kN):200; Availability:In Stock; Oil Limiting Speed (r/min):6300; Seals or Shields:Open Type; Cage Type:Plastic; D:320mm; Grease Limiting Speed (r/min):4200; Clearance:Standard; |
| 85038 / CR85038 Stainless Speedi Sleeve For Shaft Repair | SKU:2313k-qbl; B:48mm; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:Standard; D:140mm; Availability:In Stock; d:65mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
CP7140180 Thrust Plate 140x178.7x7mm Video