| No. | Brand | J | F | f | T | A | s | S | r |
| OSB3 | - | - | - | - | - | - | - | - | - |
| CL2B-KA168-2 | - | - | - | - | - | - | - | 4.763 mm | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| Powder/Granular/200g | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 18mm, | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| Dbdh10p10b/315 | - | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 6015 | koyo | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| 1648 | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 99349 / CR99349 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):6100; Weight:4.34 KGS; SKU:6222 -timken; Seals or Shields:Open Type; d:110mm; Dynamic Load Rating (kN):144; Cage Type:Steel; B:38mm; Availability:In Stock; Static Load Rating (kN):117; |
| AHX3224G Withdrawal Sleeve(matched Bearing:23224CCK/W33, C3224K) | Shielded or Sealed B1:11.1 mm; Width Plain B:7.9 mm; d:19.100 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:5100 N; Fillet Radius ra:0.79 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Basic Dynamic Radial Load Rating C:9360 N; Grease Speed Rating Open/Shielded n1:16000 rpm; D:41.3000 mm; |
| CR99122 Stainless Steel Speedi Sleeve For Shaft Repair | D:120mm; Static Load Rating (kN):41.5; B:23mm; d:65mm; Dynamic Load Rating (kN):60; Limiting Speed Rating (r/min):13000; Weight:1.00 KGS; Availability:In Stock; Reference Speed Rating (r/min):6300; Clearance:Standard; |
| 85191 / CR85191 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; B:4mm; d:4mm; Availability:In Stock; Cage Type:Steel; Weight:0.20 KGS; D:12mm; SKU:s604-2rs-zen; Clearance:Standard; |
| FTRD1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x2.5mm | Availability:In Stock; d:100mm; Weight:0.02 KGS; Cage Type:Steel; D:180mm; B:60.3mm; Clearance:Standard; Seals or Shields:Open Type; SKU:23220cc/w33-qbl; |
| TRA2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x0.8mm | Static Load Rating (kN):34.5; Preload:Light; SKU:7013ctrdudlp3-nsk; d:65mm; Oil Limiting Speed (r/min):21300; Availability:In Stock; Clearance:Standard; Seals or Shields:Open Type; Grease Limiting Speed (r/min):14000; D:100mm; |
| CR99251 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:286000 N; d:80.000 mm; B:96.00 mm; D:200.0000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:365000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3200 rpm; Grease Speed Rating n1:2700 rpm; |
| ZM140 Precision Locknut (M140x2)x180x26mm | Basic Static Radial Load Rating Co:176000 N; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:176000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; D:200.0000 mm; Fillet Radius ra:2.50 mm; d:80.000 mm; B:48.00 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CP7130170 Thrust Plate 130x168.7x7mm Video