| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 513052 | Timken | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| SQP41-50-2/3/4/5/6/7/8/9/10/11/12/14 | TOKYO | - | - | - | - | - | - | - | - |
| 3528SMD/SMD | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 11 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| TRC-411 | koyo | - | - | - | - | - | - | - | - |
| RW117 | Timken | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 1.5-2.5t/H | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 305183 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| HP22 | Danfoss | - | - | - | - | - | - | - | - |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| EAZ 212 Induction Heater | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:42300 N; Oil Speed Rating Open/Shielded n2:6700 rpm; D:115.0000 mm; Basic Static Radial Load Rating Co:35500 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:5600 rpm; B:20.00 mm; Sealed Speed Rating n3:3400 rpm; d:75.000 mm; |
| CR99168 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; D:80mm; Preload:Light; Cage Type:Plastic; Dynamic Load Rating (kN):26; Oil Limiting Speed (r/min):27000; SKU:7010ctrv1vdulp3-nsk; Grease Limiting Speed (r/min):17700; B:16mm; |
| FTRB100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1.5mm | Oil Speed Rating n2:8000 rpm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:33800 N; d:40.000 mm; B:23.00 mm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating n1:6700 rpm; |
| AOH24080(24080CACK30/W33, 24080CCK, 24080CAK Bearing Withdrawal Sleeve) | d:10.000 mm; Oil Speed Rating n2:80000 rpm; Basic Static Radial Load Rating Co:4550 N; Basic Dynamic Radial Load Rating C:8060 N; Fillet Radius rb:0.10 mm; Fillet Radius ra:0.30 mm; B:16.00 mm; Grease Speed Rating n1:55000 rpm; D:26.0000 mm; |
| CR99829 Stainless Steel Speedi Sleeve For Shaft Repair | B:6 mm; ra max.:0.3 mm; Fatigue load limit Pu:0.036 kN; Limiting speed:48000 r/min; D:17 mm; da min.:7.7 mm; Basic dynamic load rating C:1.95 kN; Da max.:15 mm; d2 ≈:8.2 mm; Calculation factor f0:11.4; |
| TMDT 2-43 Heavy Duty Surface Probe | Fillet Radius ra:1.00 mm; Speed Rating-Single and Double Sealed Grease SDG:5600 rpm; Basic Interchange FAF:-; Old MRC Bearing Number:208FS; Width - Outer Ring B0:21.0 mm; Accessories:8000 One Seal; Width - Inner Ring B1:24.00 mm; Basic Interchange BCA:8508; Basic Interchange NDH:8508; Basic Radial Load Rating-Static SCO:18000 N; |
| AOH241/1000 (241/1000ECAK30/W33, 241/1000ECAK, 241/1000CCK, 241/1000CCK/W33 Bearing Withdrawal Sleeve) | rb max.:6 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Mass plain bearing:593 kg; da max.:722 mm; Basic static load rating C0:91500 kN; dk:785 mm; ra max.:3 mm; Specific dynamic load factor K:300 N/mm²; r1 min.:3 mm; B:308 mm; |
| 86405 / CR86405 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2000 rpm; Sealed Speed Rating n3:2000 rpm; Basic Static Radial Load Rating Co:166000 N; B:60.30 mm; d:100.000 mm; D:180.0000 mm; Oil Speed Rating n2:3000 rpm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:178000 N; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
CP590120 Thrust Plate 90x118.8x5mm Video