| No. | Brand | J | F | f | T | A | s | S | r |
| 300W | - | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| 40BCV09S1-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 6310ZZC3 | - | - | - | - | - | - | - | - | - |
| 17% | - | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| Chloride30% | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| PVS-1B-19N1-2408F_UPV-1A-19N1-2.2-4-2408F_LTIS70-NR | Nachi | - | - | - | - | - | - | - | - |
| 6005ZZENR | Nachi | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 20pcs | - | - | - | - | - | - | - | - | - |
| RV025-RV150 | - | - | - | - | - | - | - | - | - |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 7202BBTVP | fag | - | - | - | - | - | 14 mm | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 16X8 | - | - | - | - | - | - | - | - | - |
| FTRA5578 Thrust Bearing Ring / Thrust Needle Bearing Washer 55x78x1mm | Dynamic Load Rating (kN):51200; Availability:In Stock; Weight:0.82 KGS; D:80mm; Clearance:C3; Grease Limiting Speed (r/min):5100; B:34.9mm; d:35mm; Static Load Rating (kN):33200; Oil Limiting Speed (r/min):6500; |
| AOH32/850 (232/850CAK/W33,232/850CAK, 232/850CCK, 232/850CCK/W33 Bearing Withdrawal Sleeve) | J1:127 mm; P180°:222 kN; da:184.15 mm; Pa:58.7 kN; P60°:557 kN; Taconite seal:TER 160; Adapter sleeve assembly:SNW 40x7.1/4; Cap bolt:1 1/4-7 UNC; S:4.763 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| CR99254 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:mr105-zen; Seals or Shields:Open Type; Weight:0.20 KGS; B:3mm; Cage Type:Steel; d:5mm; D:10mm; Clearance:Standard; |
| CR99156 Stainless Steel Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):8500; D:52mm; Dynamic Load Rating (kN):21.6; SKU:3205a-2rs1tn9/mt33-s; Clearance:Standard; Cage Type:Plastic; Fatigue Load Rating (kN):0.6; d:25mm; B:20.6mm; Availability:In Stock; |
| TKTL 10 Infrared Thermometer | ra max.:0.3 mm; da min.:34.6 mm; Mass bearing:0.12 kg; D:55 mm; Calculation factor f0:14.7; Basic dynamic load rating C:13.8 kN; B:13 mm; r1,2 min.:1 mm; D1 ≈:46.8 mm; d:30 mm; |
| 99513 / CR 99513 Stainless Speedi Sleeve For Shaft Repair | d:70.000 mm; Sealed Speed Rating n3:2600 rpm; D:180.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:143000 N; Basic Static Radial Load Rating Co:104000 N; B:42.00 mm; |
| CP7160200 Thrust Plate 160x198.7x7mm | d:41.275 mm; T:34.925 mm; Reference speed:5600 r/min; Calculation factor e:0.28; Fatigue load limit Pu:21.6 kN; d1 ≈:72.9 mm; rb max.:3.3 mm; db min.:54.5 mm; Limiting speed:6700 r/min; Mass bearing:1.47 kg; |
| TMAS 720 Machinery Shim Kit | B:6mm; Weight:0.20 KGS; SKU:635-2rs-zen; Availability:In Stock; D:19mm; Cage Type:Steel; d:5mm; Clearance:Standard; Seals or Shields:Two Rubber Seals; |
CP45578 Thrust Plate 55x77.4x4mm Video