| No. | Brand | J | F | f | T | A | s | S | r |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| BMP50/OMP50 | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| L0098953B | Parker | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| GS81156 | INA | - | - | - | - | - | - | - | - |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 70x100x16 | - | - | - | - | - | - | - | - | - |
| 6001C3 | SKF | - | - | - | - | - | - | - | - |
| 3000 | - | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| 40X74X36 | - | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| 12W | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| 53mm | - | - | - | - | - | - | - | - | - |
| 317-8021 | INA | - | - | - | - | - | - | - | - |
| CR99193 Stainless Steel Speedi Sleeve For Shaft Repair | PG:1/4 NPT; Mass pillow block:62.8 kg; Labyrinth ring:2 x LOR 108; H1:152.4 mm; P90°:113 kN; h:63.5 mm; Ca:89.789 mm; P120°:73.8 kN; da:98.425 mm; L:466.725 mm; |
| 99575 / CR 99575 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; D:400mm; Cage Type:Brass; Limiting Speed Rating (r/min):1100; Weight:47.60 KGS; B:104mm; SKU:23052kembw33c3-timke; Static Load Rating (kN):2740; Dynamic Load Rating (kN):1820; Reference Speed Rating (r/min):1300; |
| 86013 / CR86013 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:5070 N; Oil Speed Rating n2:88000 rpm; d:10.000 mm; Grease Speed Rating n1:61000 rpm; D:22.0000 mm; Fillet Radius ra:0.30 mm; Fillet Radius rb:0.10 mm; B:12.00 mm; Basic Static Radial Load Rating Co:3100 N; |
| AH216 Withdrawal Sleeve 75x80x35.5mm | F:25 mm; d:20 mm; B:20 mm; Mass inner ring:0.028 kg; r, r1,2 min.:0.3 mm; |
| CR99076 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Weight:0.02 KGS; Cage Type:Steel; D:75mm; Grease Limiting Speed (r/min):4800; Seals or Shields:Open Type; Static Load Rating (kN):76.5; d:45mm; Dynamic Load Rating (kN):57.5; SKU:32009xa-ntn; |
| 85123 / CR85123 Stainless Speedi Sleeve For Shaft Repair | B:19mm; Clearance:Standard; Availability:In Stock; D:68mm; Seals or Shields:Open Type; Cage Type:Steel; SKU:51208-qbl; Weight:0.28 KGS; d:40mm; |
| AHX3218 Withdrawal Sleeve (matched Bearing:23218CCK/W33) | Dynamic Load Rating (kN):52.5; d:60mm; Weight:0.02 KGS; SKU:6212zzc3-nsk; Clearance:C3; Limiting Speed Rating (r/min):5600; Static Load Rating (kN):36; B:22mm; D:110mm; Cage Type:Steel; |
| 89946 / CR89946 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):60; Weight:3.00 KGS; Seals or Shields:Two Rubber Seals; SKU:62314-2rs1-skf; Cage Type:Steel; D:140mm; Limiting Speed Rating (r/min):3200; Availability:In Stock; B:48mm; Fatigue Load Rating (kN):2.5; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
CP6085 Thrust Plate 60x84.3x0.8mm Video